The PhidgetInterfaceKit 0/0/4 Provides a convenient way to interface your PC with various higher-voltage devices such as incandescent bulbs, high-power relays, and motors
The 1014 contains 4 Relay Outputs for switching AC or DC power; the relays are Single Pole Double Throw (SPDT).
Note: This board is not suitable for switching signals. It takes at least 100mA of current to bridge the oxide layer that forms on the relay contacts, and most signals will not meet this requirement. If you need to switch signals, check out the 1017 - PhidgetInterfaceKit 0/0/8.
|API Object Name||InterfaceKit|
|Switching Speed Max||20 cpm|
|Recommended Wire Size||12 - 24 AWG|
|Operating Temperature Min||0 °C|
|Operating Temperature Max||70 °C|
|Dielectric Strength||1.5 kV AC|
|Contact Resistance Max||120 mΩ|
|Load Voltage Max (DC)||100 V DC|
|Load Voltage Max (AC)||250 V AC|
|Load Current Min||100 mA|
|Load Current Max (DC)||5 A|
|Load Current Max (AC)||10 A|
|Turn-on Time Max||10 ms|
|Turn-off Time Max||10 ms|
|Current Consumption Min||14 mA|
|Current Consumption Max||300 mA|
|USB Speed||Low Speed|
|Part. No. :||1014|
Questions on 1014 - PhidgetInterfaceKit 0/0/4
No questions asked yetRegister or Login to ask a question.