The 1015 can be mounted behind a sheet of glass or plastic; The recommended thickness is 1/8 inch. Use Silicon adhesive when attaching the Phidget to the material; standing the PhidgetLinearTouch off or creating space between the separation material and the Phidget can cause false-triggering to occur. Materials thicker than 1/8â€ may work, but will require a larger surface area of contact to ensure proper triggering (i.e.: two fingers instead of one).
Sliding a finger along the touch sensor varies the Analog Input 0 value from 0 to 1000 in approximately 125 discrete steps. When the finger is removed, the final measured value is retained. Two Digital Inputs are used to convey additional information: Digital Input 0 is True when contact is made with the Phidget, and Digital Input 1 is True when a finger or object comes in close proximity to the board. The Analog Input value is valid when both Digital Inputs are true.
Comes packaged with a 120cm Custom USB Cable, a Getting Started Manual and a mounting hardware kit.
For more information see:
Use spaces to separate tags. Use single quotes (') for phrases.
- Grove (Arduino)
- Raspberry PI
- Sockets, Strips & Jumpers
- Embedded Linux
- Voice and Sound
- Radio & Wireless
- Display & LED
- Robot Kits
- Mechanics and Materials
- Stepper Motors
- Motor & Servo Controllers
- Garage Sale
Excl. Tax:€16.20Incl. Tax:€19.76
Excl. Tax:€34.25Incl. Tax:€41.79
Excl. Tax:€31.50Incl. Tax:€38.43
Excl. Tax:€25.00Incl. Tax:€30.50
Excl. Tax:€1.60Incl. Tax:€1.95
You have no items to compare.