343076 3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Categories
Prices are VAT included
€26.84 Price
€22.00 + VAT

Qty
 

Details

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.

Key specs at 6 V: 200 RPM and 120 mA with no load, 40 oz-in (2.9 kg-cm) and 1.6 A at stall.

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with four different motors: high-power with long-life carbon brushes (HPCB), high-power with shorter-life precious metal brushes (HP), medium-power (MP), and low-power. The HPCB version (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by its copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).

With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change. Please see the micro metal gearmotor comparison table for detailed specifications of all our micro metal gearmotors. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application. A more basic comparison table is available below.

Some versions of the gearmotors are available with an additional 1 mm-diameter output shaft that protrudes from the rear of the motor. This 4.5 mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add an encoder, such as our magnetic encoder for micro metal gearmotors (see the picture on the right), to provide motor speed or position feedback.

Dimensions

Size: 10 × 12 × 26 mm1
Weight: 9.5 g
Shaft diameter: 3 mm2

General specifications

Gear ratio: 150.58:1
Free-run speed @ 6V: 200 rpm
Free-run current @ 6V: 120 mA
Stall current @ 6V: 1600 mA
Stall torque @ 6V: 40 oz·in
Extended motor shaft?: Y
Long-life carbon brushes?: Y
Motor type: 1.6A stall @ 6V (HPCB - carbon brush)

Notes:

1 Output shaft adds 9 mm to the 26 mm length.
2 D shaft.

Specifications

Part. No. : 3076
Shaft Diam. mm : 3

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on 3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    342377 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sfalse
    Excl. Tax:
    €14.80
    Incl. Tax:
    €18.06
      Compare
  2. 2214 - 100:1 Micro Metal Gearmotor HP with Extended Motor Shaft

    342214 2214 - 100:1 Micro Metal Gearmotor HP with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mmfalse
    Excl. Tax:
    €14.80
    Incl. Tax:
    €18.06
      Compare
  3. 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343079 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has false
    Excl. Tax:
    €21.00
    Incl. Tax:
    €25.62
      Compare
  4. 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343072 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has afalse
    Excl. Tax:
    €23.00
    Incl. Tax:
    €28.06
      Compare
  5. 2370 - 250:1 Micro Metal Gearmotor MP 6V

    342370 2370 - 250:1 Micro Metal Gearmotor MP 6V

    This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 false
    Excl. Tax:
    €19.00
    Incl. Tax:
    €23.18
      Compare
  6. 2369 - 210:1 Micro Metal Gearmotor MP 6V

    342369 2369 - 210:1 Micro Metal Gearmotor MP 6V

    This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 false
    Excl. Tax:
    €19.00
    Incl. Tax:
    €23.18
      Compare
  7. 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    344797 4797 - 380:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft

    Micromotoriduttore con ingranaggi in metallo, versione HPCB a 6v con asse per encoder. Dotato di spazzole long-life
    Excl. Tax:
    €15.50
    Incl. Tax:
    €18.91
      Compare