Details
Product Features
- Maximum Load Capacity: 100 kg
- Wheatstone Bridge Sensor
- Individually calibrated at the factory
- Plugs into the 1046 – PhidgetBridge 4-Input
Product Description
A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification. Fortunately, the 1046 PhidgetBridge will perform all the amplification and measurement of the electrical output.
This S-Type load cell can be operated in compression or tension.
Product SpecificationsPrecision | see calibration certificate |
Non-Linearity | see calibration certificate |
Repeatability | see calibration certificate |
Creep | see calibration certificate |
Temp. effect on zero | see calibration certificate |
Temp. effect on span | see calibration certificate |
Zero Balance | see calibration certificate |
Compensated Temp. Range | -10°C~+40°C |
Operating Temp. Range | -20°C~+55°C |
Safe Overload | 120%F.S |
Maximum Overload | 150%F.S |
Resources
The Data Sheet below has a comprehensive glossary that describes in practical terms the meaning and usefulness of the specifications.
WarningMake sure to calibrate your load cell before using it. You can find information on how to calibrate the cell in the 3138 Datasheet. You should also look at the 1046 – PhidgetBridge Product Manual. |
Connection
The 3138 connects to a bridge on the 1046 – PhidgetBridge 4-Input
The following table shows how to connect the Load Cell Wires to the bridge connectors.
Wire Color | Red | Green | White | Black/Yellow |
Bridge Connector | 5V | + | - | GND |
Questions on 3138 - S Type Load Cell (0-100kg) - CZL301C
No questions asked yet
Register or Login to ask a question.Related Products
-
193133 3133 - Micro Load Cell (0-5kg) - CZL635
Wheatstone bridge sensor load cell (0-5Kg). -
193132 3132 - Micro Load Cell (0-780g) - CZL616C
Wheatstone bridge sensor load cell (0-780g). -
193134 3134 - Micro Load Cell (0-20kg) - CZL635
Wheatstone bridge sensor load cell (0-20Kg). -
193135 3135 - Micro Load Cell (0-50kg) - CZL635
Wheatstone bridge sensor load cell (0-50Kg). -
193136 3136 - Button Load Cell (0-50kg) - CZL204E
Wheatstone bridge sensor button load cell (0-50Kg). -
193137 3137 - Button Load Cell (0-200kg) - CZL204E
Wheatstone bridge sensor button load cell (0-200Kg). -
713332 Load Cell - 200kg, Disc (TAS606)
This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrfalse -
713288 Teensy Arduino Shield Adapter
The Teensy Arduino Shield Adapter allows you to attach your Teensy and utilize your favorite Arduino shields without the requfalse -
713879 SparkFun Load Cell Amplifier - HX711
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measfalse -
713261 SparkFun OpenScale
The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. -
201046 1046 - PhidgetBridge 4-Input
Interfaces to up to four Wheatstone Bridge based Sensors. Supports variable data rates – from 1 to 125 samples/second. Softwafalse -
715242 SparkFun Qwiic Scale - NAU7802
Modulo per interfacciare celle di carico per ottenere accurate misure di peso. Utilizza l'integrato NAU7802