At 12.5 Kg-cm of holding torque, this is our strongest stepper motor.
Motor Controller and Connection
The 3307 stepper motor connects to the 1063 - PhidgetStepper Bipolar 1-Motor.
The following table shows how to connect the motor wires to the board connectors to get clockwise rotation. To wire for counter-clockwise rotation, swap the Red and Blue wires.
Note: Make sure to unplug the power cord from the 1063 before switching wires around.
- Very High Torque
- NEMA-17 Bipolar 4-wire
- Step angle: 1.8°
- Holding Torque: 12.5 Kg-cm @ 2.2 Amps
|Holding Torque||12.5 kg-cm / 10.85 lb-in|
|Coil Resistance||1.8 Ohms|
|Mounting Plate Size||NEMA-23|
|Number of Leads||4|
Questions on 57BYG621 NEMA-23 Bipolar 76mm Stepper
No questions asked yetRegister or Login to ask a question.