Details
The ProtoSnap series is a great way to prototype your project without a breadboard. Everything is wired together on a single board, which makes it easy to explore the possibilities of the components before snapping them apart and building them into your project.
The ProtoSnap E-Sewing Kit pairs a LilyPad coin cell breakout board with a switch, a button, and five LEDs. It comes pre-wired so you can plug in a battery and use the switch and button to turn the LEDs on and off. Once you’ve mastered using the board together, break off the individual components and use them just like you would with their normal LilyPad counterparts.
The ProtoSnap E-Sewing Kit now includes a battery so you can start your project as soon as you open the box. It also includes a fabric project template in case you don't have anything laying around to alter.
Included in the panel:
- 1 x LilyPad Coin cell Battery holder
- 1 x LilyPad Button
- 1 x LilyPad Slide Switch
- 5 x LilyPad White LED
Included with the Kit:
- 1 x Needle Set
- 1 x Bobbin of Conductive Thread
- 1 x 20mm Coin Cell Battery
- 1 x 5" Fabric Template
Documents:
Questions on ProtoSnap - LilyPad E-Sewing Kit
No questions asked yet
Register or Login to ask a question.Related Products
-
710275 Lilypad FTDI Basic Breakout - 5V
This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to workfalse -
710274 LilyPad Arduino Simple Board
This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins thanfalse -
711008 Lilypad vibe board
Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anfalse