808841 Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit

Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit

What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins.
Prices are VAT included
€16.97 Price
€13.91 + VAT

 

Details

Hey Mr. DJ! Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. (It's not big enough to be an official HAT, so we called it a bonnet, you see?) It's the exact same size as a Raspberry Pi Zero but works with any and all Raspberry Pi computers with a 2x20 connector - A+, B+, Zero, Pi 2, Pi 3, etc. We've tested it out with Raspbian (the offical operating system) and Retropie.

This Bonnet uses I2S a digital sound standard, so you get really crisp audio. The digital data goes right into the amplifier so there's no static like you hear from the headphone jack. And it's super easy to get started. Just plug in any 4Ω to 8Ω speakers, up to 3 Watts, run our installer script on any Raspberry Pi, reboot and you're ready to jam!

Each order comes as a fully tested PCB with a 2x20 header and 2x terminal blocks. Some light soldering is required to attach the header onto PCB so you can plug it into your Raspberry Pi. Once that's done either plug one of our enclosed speaker sets right into the JST jack in the middle or you can solder the terminal blocks in and then connect any speaker you like like our 4Ω 3W or 8Ω 1W. Hey you can even use a surface transducer!

Our tutorial will get you set up with instructions, you'll be rockin' out in 15 minutes.

Don't forget to make sure you have a good strong 5V power supply - especially if you're using the 3W 4 ohm speakers! 

Pi Zero and speakers not included!

Instructions, datasheets, schematics, files, Fritzing object and more in the product guide

Product Dimensions: 65.0mm x 30.0mm x 7.2mm / 2.6" x 1.2" x 0.3"

Product Weight: 7.4g / 0.3oz

Specifications

Part. No. : 3346

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Stereo Enclosed Speaker Set - 3W 4 Ohm -

    807705 Stereo Enclosed Speaker Set - 3W 4 Ohm -

    This set of two 2.8" x 1.2" speakers are the perfect addition to any audio project where you need 4 ohm impedance afalse
    Excl. Tax:
    €8.16
    Incl. Tax:
    €9.96
      Compare
  2. Raspberry Pi Model B+ 512MB RAM

    807883 Raspberry Pi Model B+ 512MB RAM

    Minicomputer Raspberry PI, versione B con 512MB di RAM. Basta inserire una SD con il sistema operativo, collegare monitor, tafalse
    Excl. Tax:
    €30.30
    Incl. Tax:
    €36.97
      Compare
  3. Raspberry Pi Model A+ 256MB RAM

    808190 Raspberry Pi Model A+ 256MB RAM

    The Raspberry Pi Model A+ is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the modfalse
    Excl. Tax:
    €38.00
    Incl. Tax:
    €46.36
      Compare
  4. Raspberry Pi 3 - Model B - ARMv8 with 1G RAM

    808607 Raspberry Pi 3 - Model B - ARMv8 with 1G RAM

    Third generation Raspberry Pi: 1.2GHz 64-bit quad-core ARMv8 CPU, 802.11n Wireless LAN, Bluetooth 4.0, Bluetooth Low Energy (BLE)
    Excl. Tax:
    €39.50
    Incl. Tax:
    €48.19
      Compare
  5. Speaker - 40mm Diameter - 4 Ohm 3 Watt

    809288 Speaker - 40mm Diameter - 4 Ohm 3 Watt

    Altoparlante diametro 40mm da 3Watt a 4 Ohm. Completo di fili gia' saldati.
    Excl. Tax:
    €5.70
    Incl. Tax:
    €6.95
      Compare