Details
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. We use four 4/40-0.5" size screws matched with plastic standoffs to attach the 2x2 button pad and Simon project boards. Using two of these bezels with two of the bottom bezels will create a 4x4 bezel appropriate for the full button pad.
Documents:
Related Products
-
707836 Button Pad 2x2 - LED Compatible
This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. -
708747 Button Pad 2x2 Bottom Bezel
This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. -
709277 Button Pad 2x2 - Breakout PCB
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors afalse -
708033 Button Pad 4x4 - Breakout PCB
This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors afalse -
700105 LED - RGB Clear Common Cathode
These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for thfalse -
707835 Button Pad 4x4 - LED Compatible
This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org.