713262 CAN-BUS Shield

CAN-BUS Shield

This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to a screen to make an in-dash project.
Categories
Prices are VAT included
€30.61 Price
€25.09 + VAT

 

Details

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll the ECU for information including coolant temperature, throttle position, vehicle speed, and engine rpms. You can also store this data or output it to a screen to make an in-dash project.

It uses the Microchip MCP2515 CAN controller with the MCP2551 CAN transceiver. CAN connection is via a standard 9-way sub-D for use with OBD-II cable. Ideal for automative CAN application. The shield also has a uSD card holder, serial LCD connector and connector for an EM506 GPS module. These features make this shield ideal for data logging application.

Note: A DS9 Cable is not included with this shield. Please be sure to check Recommended Products section below for a recommended cable to use with this board.

Note: This product is a collaboration with SK Pang Electronics. A portion of each sales goes back to them for product support and continued development.

Features

  • CAN v2.0B up to 1 Mb/s
  • High speed SPI Interface (10 MHz)
  • Standard and extended data and remote frames
  • CAN connection via standard 9-way sub-D connector
  • Power can supply to Arduino by sub-D via resettable fuse and reverse polarity protection.
  • Socket for EM506 GPS module
  • Micro SD card holder
  • Connector for serial LCD
  • Reset button
  • Joystick control menu navigation control
  • Two LED indicator

Documents:

Specifications

Part. No. : DEV-13262
Interface : SPI
Voltage : 5
Shield Type : Communication

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on CAN-BUS Shield

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Arduino Stackable Header - 8 Pin

    709279 Arduino Stackable Header - 8 Pin

    This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields.
    Excl. Tax:
    €0.29
    Incl. Tax:
    €0.35
      Compare
  2. Arduino Stackable Header - 6 Pin

    709280 Arduino Stackable Header - 6 Pin

    This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.
    Excl. Tax:
    €0.29
    Incl. Tax:
    €0.35
      Compare
  3. OBD-II UART

    709555 OBD-II UART

    This board allows you to interface with your car's OBD-II bus. It provides you a serial interface using the ELM327 command sefalse
    Excl. Tax:
    €49.27
    Incl. Tax:
    €60.11
      Compare
  4. OBD-II to DB9 Cable

    710087 OBD-II to DB9 Cable

    OBD-II to DB9 cable.
    Excl. Tax:
    €9.52
    Incl. Tax:
    €11.61
      Compare
  5. Arduino Stackable Header - 10 Pin

    711376 Arduino Stackable Header - 10 Pin

    This is a 10-pin female header, with extra long legs -- great for stacking R3-compatible Arduino shields
    Excl. Tax:
    €0.41
    Incl. Tax:
    €0.50
      Compare
  6. CAN BUS Shield For Arduino

    120370 CAN BUS Shield For Arduino

    This is an Arduino Can Bus shield. It is compatible with the Arduino standard interface and can be stacked on an Arduino UNOfalse
    Excl. Tax:
    €20.67
    Incl. Tax:
    €25.22
      Compare
  7. USB-CAN Analyzer

    809047 USB-CAN Analyzer

    Analizzatore di CAN BUS economico di alta qualita'. Semplice da usare, consente di comunicare con i dispositivi su CAN BUS cofalse
    Excl. Tax:
    €24.40
    Incl. Tax:
    €29.77
      Compare
  8. CAN-BUS Shield V2

    809151 CAN-BUS Shield V2

    CAN-BUS Shield which adopts MCP2515 CAN-BUS controller with SPI interface and MCP2551 CAN transceiver to give you Arduino/Seefalse
    Excl. Tax:
    €22.40
    Incl. Tax:
    €27.33
      Compare
  9. SparkFun AST-CAN485 Dev Board

    714483 SparkFun AST-CAN485 Dev Board

    The SparkFun AST-CAN485 Dev Board is a miniature Arduino in the compact form factor of the Pro Mini. In addition to all the ufalse
    Excl. Tax:
    €46.62
    Incl. Tax:
    €56.88
      Compare
  10. SparkFun AST-CAN485 WiFi Shield

    714597 SparkFun AST-CAN485 WiFi Shield

    Shield WiFi con ESP8266, per la scheda AST-CAN485 Dev Board
    Excl. Tax:
    €17.47
    Incl. Tax:
    €21.31
      Compare
  11. SparkFun AST-CAN485 I/O Shield (24V)

    714598 SparkFun AST-CAN485 I/O Shield (24V)

    Shield con interfaccia I/O a 24V, per la scheda AST-CAN485 Dev Board
    Excl. Tax:
    €21.45
    Incl. Tax:
    €26.17
      Compare
  12. SparkFun RedBoard Artemis

    715444 SparkFun RedBoard Artemis

    Scheda Arduino compatibile, con modulo Bluetooth BLE Artemis, 1MB di memoria Flash e 384K di RAM, clock 48/96MHz. Connettori false
    Excl. Tax:
    €19.60
    Incl. Tax:
    €23.91
      Compare