Details
The ETH0621 offers 6 digital inputs (accepting 10V - 24V), 2 independently switched 24V 5A outputs and a 24 volt, 5A motor controller that effortlessly integrates motion control over Ethernet. The ETH0621 also includes a motor surge protection circuit that shuts the motor down in the event of the current exceeding 22A.
Operating Temperature
-40C to +85C
LED Indication
The ETH0621 provides a blue LED for indication of power to the board, this will pulse quickly in the event of the firmware being updated and for 400ms every 2 seconds in the event that the board has detected a current surge and shut the motor down. There are red LED's mounted next to the digital outputs and relays to indicate there state. Green LED's are mounted next to each of the 6 inputs to indicate active inputs.
Relay Power Rating
If the contact load voltage and current of the relay are in the region enclosed by the solid and dotted lines in the figure below, the relay can perform stable switching operation. If the relay is used at a voltage or current exceeding this region, the life of the contacts may be significantly shortened.
Specifications
Part. No. : | ETH0621 |
Questions on ETH0621 - 24v Motor controller 5A - Ethernet
No questions asked yet
Register or Login to ask a question.Related Products
-
807487 ETH484 - 4 Relays at 16A, 8 Digital IO and 4 Analogue Inputs
The ETH484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analofalse -
807988 ETH002 - 16Amp, 2 Channel Relay Module
This module provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The module is power frofalse -
808247 ETH044 - 5Amp 4 Channel SSR module
The ETH044 provides four solid state relay outputs at 230VAC with a current rating of up to 5Amps per channel and up to 10Ampfalse -
201019 1067 - PhidgetStepper Bipolar HC - Stepper Motor Controller
The 1067 can be used in applications that require very precise positioning; This is also the product you want to use to contrfalse -
201020 1067 - PhidgetStepper Bipolar HC - Stepper Motor Controller
The 1067 can be used in applications that require very precise positioning; This is also the product you want to use to contrfalse -
847988 ETH002-B - 2 x 16A ethernet relay
This module provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The module is power frofalse -
809502 dS2242 - 2 x 16A ethernet relay
The ETH8020-B provides 20 volt free contact relay outputs with a current rating of up to 16Amp each and 8 analogue inputs. Thfalse