Details
This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. This version also has a 4.5 × 1 mm extended motor shaft.
Key specs at 6 V: 100 RPM and 120 mA with no load, 70 oz-in (5 kg-cm) and 1.6 A at stall.
These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with four different motors: high-power with long-life carbon brushes (HPCB), high-power with shorter-life precious metal brushes (HP), medium-power (MP), and low-power. The HPCB version (shown on the left in the picture below) can be differentiated from versions with precious metal brushes (shown on the right) by its copper-colored terminals. Note that the HPCB terminals are 0.5 mm wider than those on the other micro metal gearmotor versions (2 mm vs. 1.5 mm), and they are about 1 mm closer together (6 mm vs. 7 mm).
With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change. Please see the micro metal gearmotor comparison table for detailed specifications of all our micro metal gearmotors. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application. A more basic comparison table is available below.
Some versions of the gearmotors are available with an additional 1 mm-diameter output shaft that protrudes from the rear of the motor. This 4.5 mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add an encoder, such as our magnetic encoder for micro metal gearmotors (see the picture on the right), to provide motor speed or position feedback.
Dimensions
Size: | 10 × 12 × 26 mm1 |
---|---|
Weight: | 9.5 g |
Shaft diameter: | 3 mm2 |
General specifications
Gear ratio: | 297.92:1 |
---|---|
Free-run speed @ 6V: | 100 rpm |
Free-run current @ 6V: | 120 mA |
Stall current @ 6V: | 1600 mA |
Stall torque @ 6V: | 70 oz·in |
Extended motor shaft?: | Y |
Long-life carbon brushes?: | Y |
Motor type: | 1.6A stall @ 6V (HPCB - carbon brush) |
Notes:
Specifications
Part. No. : | 3079 |
Shaft Diam. mm : | 3 |
Questions on 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft
No questions asked yet
Register or Login to ask a question.Related Products
-
582512 298:1 Micro Metal Gearmotor HP
This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 298:1 metal gearbox, sfalse -
342377 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft
This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sfalse -
342214 2214 - 100:1 Micro Metal Gearmotor HP with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mmfalse -
342213 2213 - 50:1 Micro Metal Gearmotor HP with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm,false -
343074 3074 - 75:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has afalse -
343076 3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has false -
343072 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft
This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has afalse -
342370 2370 - 250:1 Micro Metal Gearmotor MP 6V
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 248.98:1 metal gearbox. It has a cross section of 10 false -
342369 2369 - 210:1 Micro Metal Gearmotor MP 6V
This gearmotor is a miniature medium-power, 6 V brushed DC motor with a 210.59:1 metal gearbox. It has a cross section of 10 false -
344760 4760 - Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Encoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCB -
344761 4761 - Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V
Encoder a quadratura per micromotori con asse posteriore sporgente, inclusa versione HPCB. Versione con connettore orizzontale