808745 Genuino MKR1000

Genuino MKR1000

Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking.
Categories
Prices are VAT included
€37.70 Price
€30.90 + VAT

 

Details

Arduino MKR1000 has been designed to offer a practical and cost effective solution for makers seeking to add Wi-Fi connectivity to their projects with minimal previous experience in networking. 

It is based on the Atmel ATSAMW25 SoC (System on Chip), that is part of the SmartConnect family of Atmel Wireless devices, specifically designed for IoT projects and devices. 

The ATSAMW25 is composed of three main blocks:
• SAMD21 Cortex-M0+ 32bit low power ARM MCU
• WINC1500 low power 2.4GHz IEEE® 802.11 b/g/n Wi-Fi
• ECC508 CryptoAuthentication
The ATSAMW25 includes also a single 1x1 stream PCB Antenna.
The design includes a Li-Po charging circuit that allows the Arduino/Genuino MKR1000 to run on battery power or external 5V, charging the Li-Po battery while running on external power. Switching from one source to the other is done automatically. 

A good 32 bit computational power similar to the Zero board, the usual rich set of I/O interfaces, low power Wi-Fi with a Cryptochip for secure communication, and the ease of use of the Arduino Software (IDE) for code development and programming. All these features make this board the preferred choice for the emerging IoT battery-powered projects in a compact form factor.

The USB port can be used to supply power (5V) to the board.
The Arduino/Genuino MKR1000 is able to run with or without the Li-Po battery connected and has limited power consumption.
The MKR1000 Wifi module supports certificate SHA-256.
Warning: Unlike most Arduino & Genuino boards, the MKR1000 runs at 3.3V. The maximum voltage that the I/O pins can tolerate is 3.3V. Applying voltages higher than 3.3V to any I/O pin could damage the board. While output to 5V digital devices is possible, bidirectional communication with 5V devices needs proper level shifting.
You can find here your board warranty informations.
Getting Started
You can find in the Getting Started section all the information you need to configure your board, use the Arduino Software (IDE), and start tinker with coding and electronics. Full details and examples on how to use the WiFi interface are available in the WiFi101 Library reference page.
Need Help?

Specifications

Part. No. : GBX00004

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on Genuino MKR1000

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Genuino Uno Rev3

    808640 Genuino Uno Rev3

    The Genuino UNO R3 is a microcontroller board based on the ATmega328.
    Excl. Tax:
    €18.10
    Incl. Tax:
    €22.08
    As low as:
    €18.30
      Compare
  2. Genuino Mega 2560 Rev3

    808641 Genuino Mega 2560 Rev3

    The Genuino Mega 2560 is a microcontroller board based on the ATmega2560.
    Excl. Tax:
    €29.40
    Incl. Tax:
    €35.87
      Compare
  3. Genuino Starter Kit - ITALIANO -

    808642 Genuino Starter Kit - ITALIANO -

    Questo kit ti introduce all'uso di Genuino attraverso la realizzazione pratica di 15 progetti creativi di diverso livello di false
    Excl. Tax:
    €69.80
    Incl. Tax:
    €85.16
      Compare
  4. Genuino Micro

    808746 Genuino Micro

    Genuino Micro is the smallest Genuino board to offer the full set of analog and digital pins. The Micro’s processor is as powfalse
    Excl. Tax:
    €18.00
    Incl. Tax:
    €21.96
      Compare

Price Match



* Required Fields