Genuino Zero is a simple and powerful 32-bit extension of the platform established by the UNO. The Zero board expands the family by providing increased performance, enabling a variety of project opportunities for devices, and acts as a great educational tool for learning about 32-bit application development. The Zero applications span from smart IoT devices, wearable technology, high-tech automation, to crazy robotics. The board is powered by Atmel’s SAMD21 MCU, which features a 32-bit ARM Cortex® M0+ core. One of its most important features is Atmel’s Embedded Debugger (EDBG), which provides a full debug interface without the need for additional hardware, significantly increasing the ease-of-use for software debugging. EDBG also supports a virtual COM port that can be used for device programming and traditional Arduino boot loader functionality.
Genuino Zero and Arduino Zero share the same components, characteristics and quality of manufacturing. They are actually the same board under a different brand. Depending on the area of the world where you live you’ll be able to purchase an Arduino Zero or a Genuino Zero. Learn more.
|Microcontroller||ATSAMD21G18, 32-Bit ARM Cortex M0+|
|Input Voltage (recommended)||from 7 to 12 Volts|
|Digital I/O Pins||20|
|PWM Digital I/O Pins||All but pins 2 and 7|
|Analog Input Pins||6, 12-bit ADC channels|
|Analog Output Pins||1, 10-bit DAC|
|DC Current per I/O Pin||7 mA|
|Flash Memory||256 KB|
|Clock Speed||48 MHz|
|Part. No. :||GBX00003|