808635 Grove - 6-Axis Accelerometer&Gyroscope

Grove - 6-Axis Accelerometer&Gyroscope

Grove - 6-Axis Accelerometer&Gyroscope is a cost-effective Grove sensor integrated with a 3-axis digital accelerometer and a 3-axis digital gyroscope.
Categories
Prices are VAT included
€11.66 Price
€9.56 + VAT

 

Details

Grove - 6-Axis Accelerometer&Gyroscope is a cost-effective Grove sensor integrated with a 3-axis digital accelerometer and a 3-axis digital gyroscope.

With a serious low power consumption digital chip LSM6DS3 and power supply regulator inside, it features high sensitivity, green tech and low noise interference. It can be configured to different sensitivity levels of acceleration and different angular rate measurement range. Provided with detailed SDK, it can make the prototyping process quicker and easier.

This product can be used for different applications for tilt, motion, and tap sensing, such as robotics, IoT devices and consumer electronic devices.

Features:

  • Grove interfaced and cost-effective.
  • Digital-output for 6 DOF motion data.
  • ±2/±4/±8/±16 g full scale leaner acceleration sensing range for various environment.
  • ±125, ±245, ±500, ±1000, ±2000 degree per seconds(dps) for angular rate measurement range make it versatile.
  • Detailed SDK for easier programming.
  • Regulated power supply for reliable data to be collected.
  • Programmed interrupts for different event.
  • 8 kbyte data buffering.

Specification:

Analog supply voltage: 5V/3.3V(DC)

Power consumption: 0.9 mA in combo normal mode and 1.25 mA in combo high-performance mode up to 1.6 kHz

Linear acceleration measurement range ±2/±4/±8/±16 g full scale (typical value)

Angular rate measurement range ±125, ±245, ±500, ±1000, ±2000 dps(typical value)

Linear acceleration sensitivity 0.061(FS = ±2), 0.122(FS = ±4), 0.244(FS = ±8), 0.488(FS = ±16) mg/LSB

Angular rate sensitivity 4.375(FS = ±125), 8.75(FS = ±245), 17.50(FS = ±500), 35(FS = ±1000), 70(FS = ±2000)

 

Platform Seeeduino/Arduino Rasberry Pi LinkIt One Beaglebone

Supported status Supported Supported Supported Supported

Notes If no version number is not represented for a specific platform, it means this product support all versions within this platform. But you will need additional corresponding Grove shield board such as Grove - Base shield v2.

 

Please visit our wiki page for more info about this product.

Specifications

Part. No. : 105020012
Interface : I2C
Voltage : 5
Shield Type : Sensors

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on Grove - 6-Axis Accelerometer&Gyroscope

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)

    115124 Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)

    The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse
    Excl. Tax:
    €2.83
    Incl. Tax:
    €3.45
      Compare
  2. Seeeduino Lotus V1.1 - ATMega328 Board with Grove Interface

    809226 Seeeduino Lotus V1.1 - ATMega328 Board with Grove Interface

    It turns out Seeeduino Lotus V1.0 is very welcome because it combines the advantages of Seeeduino board and base shield and afalse
    Excl. Tax:
    €12.00
    Incl. Tax:
    €14.64
      Compare
  3. Seeeduino Lotus Cortex-M0+

    809309 Seeeduino Lotus Cortex-M0+

    It turns out Seeeduino Lotus V1.0 is very welcome because it combines the advantages of Seeeduino board and base shield and afalse
    Excl. Tax:
    €11.40
    Incl. Tax:
    €13.91
      Compare