Details
Grove - OLED 1.12'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Grove - OLED 1.12" is constructed with 96 x 96 dot matrix OLED module ([ LY120])and SSD1327 driver IC. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim / thin outline, wide viewing angle, wide temperature range, and low power consumption.
KEY FEATURES
- - Dot Matrix: 96 x 96 Pixels
- - Color: Grayscale Display (16 Gray shades)
- - Supports both Normal and Inverse Color Display
- - Supports Continuous Horizontal Scrolling
- - Grove compatible 4pin I2C connector
- - Works with both 5V and 3.3V logic MCUs
- - Interface: I2C
- - Wide range of operating temperature: -40 °C ~ 70 °C
- APPLICATION IDEAS
- - Graphic display adapter for Seeeduino and Arduino using Grove stem board
- - Display adapter for any 5V or 3.3V MCU which supports I2C interface
- - Can be used with mbed microcontroller
Please visit our wiki page for more info about this product.
Specifications
Part. No. : | 104030011 |
Shield Type : | Display |
Interface : | I2C |
Questions on Grove - OLED Display 1.12''
No questions asked yet
Register or Login to ask a question.Related Products
-
115045 Grove - OLED Display 128*64
LED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface. -
115049 Grove - Universal 4 Pin 20cm Cable (5 PCs Pack)
It is compatible with all modules included in Grove system. 5 cables included in this pack. -
115121 Grove - Universal 4 Pin Buckled 20cm Cable (5 PCs pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
115122 Grove - Universal 4 Pin Buckled 50cm Cable (5 PCs Pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
115123 Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs Pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
115124 Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
711987 Basic 16x2 Character OLED - Yellow on Black
This is a basic 5V 16 character by 2 line OLED display with yellow text on a black background. OLEDs (Organic Light Emitting false -
713003 SparkFun Micro OLED Breakout
This breakout is perfect for adding graphics to your next Arduino project, displaying diagnostic information without resortinfalse -
808884 OLED Breakout Board - 16-bit Color 1.5" w/microSD holder
This OLED uses the SSD1351 driver chip, which manages the display. You can talk to the driver chip using 4-wire write-only SPfalse -
714532 SparkFun Micro OLED Breakout (Qwiic)
The SparkFun Lumenati 8-stick is a small board equipped with eight APA102C LEDs in a row and two mounting positions, that hasfalse -
714059 SmartiPi Touch
The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into false -
809226 Seeeduino Lotus V1.1 - ATMega328 Board with Grove Interface
It turns out Seeeduino Lotus V1.0 is very welcome because it combines the advantages of Seeeduino board and base shield and afalse -
714074 SparkFun 20x4 SerLCD - Black on RGB 3.3V
Display seriale basato su chip AVR, e' una soluzione semplice ed economica per aggiungere un Display RGB 20x4 a qualsiasi profalse -
809309 Seeeduino Lotus Cortex-M0+
It turns out Seeeduino Lotus V1.0 is very welcome because it combines the advantages of Seeeduino board and base shield and afalse