Details
The Relay is a digital normally open switch that controls a relay capable of switching much higher voltages and currents than your normal Arduino boards. When set to HIGH, the LED will light up and the relay will close allowing current to flow. The peak voltage capability is 250V at 10 amps.
Please exercise great care when working with mains voltages— if in doubt contact a professional such as a licensed electrician for help.
Dimension:42.00mm*24.00mm*19.50mm
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
Document
Specifications
Part. No. : | COM22639P |
Related Products
-
115049 Grove - Universal 4 Pin 20cm Cable (5 PCs Pack)
It is compatible with all modules included in Grove system. 5 cables included in this pack. -
115121 Grove - Universal 4 Pin Buckled 20cm Cable (5 PCs pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
115122 Grove - Universal 4 Pin Buckled 50cm Cable (5 PCs Pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
115123 Grove - Universal 4 Pin Buckled 5cm Cable (5 PCs Pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
115124 Grove - Universal 4 Pin Buckled 30cm Cable (5 PCs Pack)
The Universal 4 Pin Buckled Cable is made for the Grove System to connect all of the Twigs to the Stem - Basic Shield or to ofalse -
713815 SparkFun Beefcake Relay Control Kit
The heart of the board is a sealed, SPDT 20A/10A Relay. The relay is controlled by 5V logic through a transistor, and an LED false -
713906 SparkFun Multiplexer Breakout - 8 Channel (74HC4051)
The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog multiplexer/dfalse