Details
Put a voltage meter anywhere with this very handy display. This panel meter simply connects to whatever DC supply you are trying to track, easy to wire up!
Simply connect the red wire to the positive supply, and black to negative ground. The display has a microcontroller that will read the voltage, compare it to a stable reference and display the voltage with 0.1V precision on a 3-digit 0.56" tall 7-segment display. It works from 4.5V up to 30V and is reverse-polarity protected so it will be good for nearly any electronic project! The meter draws 3-4mA to power the microcontroller and display. This particular LED display is a nice vivid green, which we found very readable. To mount to your enclosure, simply cut a 45.5mm × 26.5mm rectangle and snap it in.
Dimensions:
- Dimensions: 48x29x21mm
- Panel cutout: 45.5mm x 26.5mm
- Digit size: 14mm/0.56" high, green LEDs
- Refresh rate: about 2 Hz
Power specifications:
- 4.5V to 30V DC measurements
- 0.1V precision
- 3-4mA draw
- Green LED display
- Reverse polarity protected
Specifications
Part. No. : | 575 |
Questions on Panel Volt Meter - 4.5V to 30VDC
No questions asked yet
Register or Login to ask a question.Related Products
-
807934 Mini 2-wire Volt Meter (3.2 - 30 VDC)
Simply connect the red wire to the positive supply, and black to negative ground. The display has a microcontroller that willfalse -
807936 Panel Current Meter - 0 to 9.99A
Put a current meter anywhere with this very handy display. This panel meter requires a DC voltage to run, and then has two thfalse