808140 MiFare Classic (13.56MHz RFID/NFC) Card - 1KB

MiFare Classic (13.56MHz RFID/NFC) Card - 1KB

These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle MiFare cards as there are a few other encoding standards (like FeLica)
Categories
Prices are VAT included
€4.04 Price
€3.31 + VAT

Qty
 

Details

This is a blank MiFare Classic card - often used for train/bus passes but also found in other systems where a proximity card is desired. The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.

These can be read by almost any 13.56MHz RFID/NFC reader but make sure it can handle MiFare cards as there are a few other encoding standards (like FeLica) They are tested and work great with both our PN532 NFC/RFID breakout board and Adafruit NFC/RFID Shield for Arduino!

These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes. You can use our PN532 NFC/RFID breakout board or Adafruit NFC/RFID Shield for Arduino to read and write data to the EEPROM inside the tag. There is also a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.

S50 chip specification:

  • 1 KiloByte (8 KiloBit) non-volatile EEPROM storage
  • Built in encryption engine with 48-bit key
  • 4 Byte unique identifier burned into the chip
  • 13.56 MHz frequency

Tag specification:

  • 85.5mm x 54mm x 1mm /3.36" x 2.1" x 0.03"
  •  
  • 6.3 grams / 0.2 oz
  • Works about 4" away from reader

Downloads:

NXP S50 datasheet

Specifications

Part. No. : 359

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on MiFare Classic (13.56MHz RFID/NFC) Card - 1KB

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. PN532 NFC/RFID controller breakout board - v1.3

    501364 PN532 NFC/RFID controller breakout board - v1.3

    Il PN532 e' il piu' diffuso chip NFC, e' quello che si trova nella maggior parte dei telefoni o dispositivi che utilizzano l'NFC.
    Excl. Tax:
    €42.40
    Incl. Tax:
    €51.73
      Compare
  2. Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras

    501789 Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras

    The Adafruit NFC shield uses the PN532 chip-set (the most popular NFC chip on the market) and is what is embedded in pretty mfalse
    Excl. Tax:
    €42.40
    Incl. Tax:
    €51.73
      Compare