Details
This is essentially a ramped up version of our Ardumoto motor driver shield. For this monster shield we’ve replaced the L298 H-bridge with a pair of VNH2SP30 full-bridge motor drivers. We’ve also beefed up the support circuitry so this board is capable of driving a pair of high-current motors! The VIN and motor out are pitched for our 5mm screw terminals (not included), making it easy to connect larger gauge wires.
Note: When using this board in extreme high-demand applications it may be necessary to improve thermal performance with a heat-sink or fan and to solder the wires directly to the board instead of using a screw terminal (in addition to the myriad other complications present in a high-current system) However, when using the board at currents up to 6A the chips will barely become noticeably warm.
Features:
- Voltage max: 16V
- Maximum current rating: 30 A
- Practical Continuous Current: 14 A
- Current sensing available to Arduino analog pin
- MOSFET on-resistance: 19 mΩ (per leg)
- Maximum PWM frequency: 20 kHz
- Thermal Shutdown
- Undervoltage and Overvoltage shutdown
Documents:
- Schematic
- Eagle Files
- Datasheet (VNH2SP30)
- Example Code
- GitHub (Design Files & Example Code)
Specifications
Part. No. : | DEV-10182 |
Interface : | I/O |
Voltage : | 5 |
Shield Type : | Motor Ctrl |
Related Products
-
709279 Arduino Stackable Header - 8 Pin
This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields. -
709280 Arduino Stackable Header - 6 Pin
This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. -
709815 Ardumoto - Motor Driver Shield
This is a motor shield for Arduino that will control two DC motors. Based on the L298 H-bridge, the Ardumoto can drive up to false -
582503 2503 - Pololu Dual MC33926 Motor Driver Shield for Arduino
Motor Driver duale per Arduino basato sul chip MC33926. Alimentazione da 5 a 28V, potenza massima 3A per ogni motore. -
342507 2507 - Pololu Dual VNH5019 Motor Driver Shield for Arduino
Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a false -
342511 2511 - Pololu DRV8835 Dual Motor Driver Shield for Arduino
This small shield is an easy, economical way to control two small brushed DC motors with an Arduino or Arduino-compatible boafalse -
713310 SparkFun Ludus Protoshield
The SparkFun Ludus Protoshield is an Arduino compatible shield designed to make connecting motors and sensors to your Arduinofalse -
713287 SparkFun WiFi Shield - ESP8266
The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet ofalse -
120017 2x2A Motor Shield for Arduino Twin
This motor arduino shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output currentfalse -
120259 RS485 Shield For Arduino
This motor arduino shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output currentfalse -
342517 2517 - Pololu Dual G2 High-Power Motor Driver 18v22 Shield
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discretfalse -
342515 2515 - Pololu Dual G2 High-Power Motor Driver 18v18 Shield for Arduin
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its twin discretfalse