500131 PIC-KIT3 Low Cost

PIC-KIT3 Low Cost

PIC-KIT3 is completely replacement of Microchip's original MPLAB-PICKIT3 and with it you can do everything you can do with the original MPLAB-PICKIT3.
Categories
Prices are VAT included
€34.71 Price
€28.45 + VAT

 

Details

 

PIC-KIT3 is low cost programmer / debugger, with only 55 x 55 mm (2.16 x 2.16") dimensions and only 30gr weight (without ICSP cable and packing) this little device fits in your pocket and is very convenient to carry with you when you work in field. PIC-KIT3 is completely replacement of Microchip's original MPLAB-PICKIT3 and with it you can do everything you can do with the original MPLAB-PICKIT3.

FEATURES:

  • USB (Full Speed 2 M bits/s) interface to host PC
  • Real time background debugging
  • MPLAB IDE GUI (latest release available for free download from Microchip's web site)
  • Built in over-voltage/short circuit monitor
  • Firmware upgradeable from PC
  • Light plastic enclosure
  • Supports low voltage to 2.0 volts. (2.0 to 6.0 range)
  • Diagnostic bi-color LED (Busy, Error)
  • USB power status green LED
  • Reading/Writing memory space and EEDATA areas of target microcontroller
  • Programs configuration bits
  • Erase of program memory space with verification
  • Peripheral freeze-on-halt stops timers at breakpoints

HARDWARE:

PIC ICSP connector (top view)

SOFTWARE:

MPLAB-IDE - you can download the latest version from Microchip's web site.

Q: What USB cable I need? 
A: You must have USB type A-B cable to connect to PC, all PC USB hosts have USB-A connector while PIC-KIT3 have USB-B connector so the cable should be USB A-to-B type.

Q: What should I know when connect PIC-KIT3 to target board.
A: It's very important your target PIC MCLR to not be connected directly to VCC! During the programming/debugging MCLR goes as high as 13VDC and if your target MCLR is connected directly to target VCC you will blow either PIC-KIT3 either your target board. Use always 10K pullup resistor from MCLR to VCC.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on PIC-KIT3 Low Cost

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.

Price Match



* Required Fields