500123 PIC32 Pinguino OTG - PIC32 development board + USB OTG

PIC32 Pinguino OTG - PIC32 development board + USB OTG

ARDUINO like board with PIC32MX440F256H based on "Pinguino" project. OTG USB version
Prices are VAT included
€26.72 Price
€21.90 + VAT

 

Details

 

ARDUINO like board with PIC32MX440F256H with USB OTG

FEATURES:

  • PIC32MX440F256H 80 Mhz microcontroller 256KB Flash 32KB RAM
  • DCDC power supply allow power supply voltage from 9 to 30V DC thus making possible to take virtually any power supply adapter on the market, also enable application which are in industrial power supply 24VDC.
  • carefully selected all components to work reliable in INDUSTIRAL temperature range -25+85C so the board can be used in INDUSTIRAL applications.
  • ULTRA LOW POWER voltage regulators and the consumption is only few microamps, which enables handheld and battery powered applications.
  • Li-Ion rechargable battery power supply option with BUILD-IN on board charger, so when you attach battery it is automatically charged and kept in this state until the other power source (USB or external adapter) is removed and it AUTOMATICALLY will power the board - no jumpers, no switches!
  • microSD card for data logging
  • UEXT connector which allow many existing modules like RF, ZIGBEE, GSM, GPS to be connected
  • allow RTC - Real Time Clock.
  • NOISE IMMUNE design.
  • Separate voltage regulator for the Analog part, which allow the ADC to be read correctly without the digital noise pickup.
  • Optionally if someone need higher precision and temperature stability in Analog reading we have provision on the board for Aref preciese source.
  • the LEDs and the BUTTONs are on the edge of the board so there is easy access even if the boards have shields on them
  • all components are LOWER than the connectors, so the shields do not interference with them
  • mini USB connector is used which is common and used in most cell phones, so you do not have to buy other cables
  • original Arduino design had flaw and the connectors were not spaced at 0.1" this make perfo board use impossible, to keep the compatibility we have same spacing but we add next to this connector on 0.1" which customer can use with perforated boards
  • all signals on the connectors are printed on top and on bottom of the board, so when you check with probe you know exactly which port you are measuring
  • 4 mount holes make board attachment easier

DOCUMENTS:

HARDWARE:

SOFTWARE:

 

Specifications

Part. No. : PIC32-PINGUINO-OTG

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on PIC32 Pinguino OTG - PIC32 development board + USB OTG

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. PIC32-PINGUINO-MICRO

    500138 PIC32-PINGUINO-MICRO

    ARDUINO like board with PIC32MX440F256H with USB OTG - LOW COST 32 BIT PINGUINO MAPLE ARDUINO LIKE DEVELOPMENT BOARD
    Excl. Tax:
    €12.30
    Incl. Tax:
    €15.01
      Compare
  2. RECHARGABLE LI-PO BATTERY 3.7V 1400mAh WITH JST CONNECTOR

    500146 RECHARGABLE LI-PO BATTERY 3.7V 1400mAh WITH JST CONNECTOR

    This is rechargable Li-Po high discharge current battery with JST connector ready to plug to many Olimex development boards.
    Excl. Tax:
    €6.90
    Incl. Tax:
    €8.42
      Compare

Price Match



* Required Fields