Skip to content
Raspberry Pi Motor Board v1.0
SKU 808354

Raspberry Pi Motor Board v1.0

by Seeed Studio
€65,00 - €65,00
€65,00
€65,00 - €65,00
€65,00

Tutti i prezzi sono IVA inclusa

Availability:
Only 1 left!
Richiesta Sconto per Quantita' e Informazioni
Raspberry Pi Motor Driver Board v1.0 is based on the Freescale MC33932 dual H-Bridge Power IC, which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Raspberry Pi B/B+/A+ and Pi 2 Model B, controlling the speed and direction of each one independently.
Raspberry Pi Motor Driver Board v1.0 support a very wide range of input voltage from 6V~28V. otherwise ,the on board DC/DC converter support a very wide range of input voltage, and can provide a 5V power supply for the Raspberry Pi with 1000mA maximum current. So, you just need one power supply to drive the motors and power up the Raspberry Pi.
 
Features:
  • Operating Voltage: 6V ~ 28V
  • DC/DC output: 5V 1000mA @ "5V" pin
  • Output Current(For Each Channel ): 2A (continuous operation) / 5A(peak)
  • Output Duty Range: 0%~100%
  • Output short-circuit protection (short to VPWR or GND)
  • Over-current limiting (regulation) via internal constant-off-time PWM
  • Temperature dependant current limit threshold reduction
  • Raspberry Pi compatible

Compatible:Raspberry Pi ; Other main board via jumpers;
Power interface:DC Jack;
Dimensions:91.20 * 56.15mm;
Operating Voltage: 6V ~ 28V
 
Documents:
Please visit our wiki page for more info about this product.