130592 Robotis - Dynamixel XL-320

Robotis - Dynamixel XL-320

The XL-320 servo from ROBOTIS is so small you might mistake it for an ordinary hobby servo, but you would be missing out! Despite its diminutive size, it is actually one of the newest models in the DYNAMIXEL robot servo line from ROBOTIS.
Categories
Prices are VAT included
€29.68 Price
€24.33 + VAT

Qty
 

Details

The XL-320 servo from ROBOTIS is so small you might mistake it for an ordinary hobby servo, but you would be missing out! Despite its diminutive size, it is actually one of the newest models in the DYNAMIXEL robot servo line from ROBOTIS.

Each XL-320 can produce up to 0.39 N-m (55 in-oz) of torque and rotate at 114 RPM in precisely controlled 0.29° increments. For its size (24 x 36 x 27 mm) and weight (16.7 g) there is no other servo that can compete with the XL-320 in performance and durability. The XL-320 has all the most important features of larger DYNAMIXEL servos in a much smaller package.

Features

  • Position, temperature, load, and input voltage feedback
  • PID control for high accuracy
  • 7.4 V recommended input voltage
  • TTL communication for easy daisy chaining
  • 24 x 36 x 27 mm compact size
  • 16.7 g weight
  • Embedded 238:1 gear reduction with built in safety clutch
  • 3 color programmable LEDs

Like other DYNAMIXEL Robot Actuators, XL-320 servos are network driven using the TTL communication protocol, which means they can each be addressed with a unique ID. By default, each servo come set to ID #1 and at 1 Mbps baud rate. Be sure to change those to suit your needs if you connect more than one XL-320 together. The ID can be set dynamically, making it easy for users to configure their actuators for their specific robot. The 100 mm cable included with each servo can be used to daisy chain the servos for easy construction of complex humanoid robots like the DARWIN Mini which uses 16 XL-320 servos to achieve amazing life-like movements and gestures.

Unlike the other DYNAMIXEL robot servos, the XL-320 uses a different 3P connector. Because of this, the only currently supported controller is the OpenCM9.04-B and the OpenCM9.04-C. The XL-320 is data compatible with other ROBOTIS controllers, however, the power requirements and cable connectors are different so if you don't want to use the OpenCM9.04-B/C you may be able to hack together your own solution.

Package Contents

  • 1 x DYNAMIXEL XL-320
  • 1 x 3P Cable 100 mm

Plenty of support material is available for the XL-320 including complete documentation, specifications, software downloads, and 3D CAD models.

Specifications

Part. No. : 902-0087-000
Form Factor : Standard
Electronics : Digital
Voltage (V) : 7.4
Interface : Dynamixel TTL
Speed (s/60°) : 114rpm
Torque : 0.39Nm
Dimensions (mm) : 24 x 36 x 27mm
Weight (gr) : 16.7

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on Robotis - Dynamixel XL-320

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Robotis - OpenCM9.04-C

    130590 Robotis - OpenCM9.04-C

    OpenCM9.04 is an open-source controller that runs under 32bit ARM Cortex-M3.
    Excl. Tax:
    €22.37
    Incl. Tax:
    €27.29
      Compare
  2. Robotis - OpenCM 485 Expansion Board

    130591 Robotis - OpenCM 485 Expansion Board

    The OpenCM 485 Expansion Board connects to the OpenCM9.04 controller to connect Dynamixels that support RS-485 and TTL. Battefalse
    Excl. Tax:
    €33.62
    Incl. Tax:
    €41.02
      Compare

Price Match



* Required Fields