Details
The SCR02 is a sensor controlled relay module capable of autonomous operation. The SRC02 may be connected to most of our ultrasonic rangers or to 0-5v analogue inputs. Operations can be configured using a free software for windows, by connecting SCR02 with an USB cable
Specifications
- 0-5v analogue inputs or direct connection to ultrasonic rangers.
- Number of Relay's - 2
- Power - 12V DC supplied separately.
- Configuration interface - USB Mini
- Relay current - Up to 16Amp @24vdc or 250vac
- Connections - Screw Terminals for N/O N/C and Common contacts.
Support
Specifications
Interface : | I2C |
Relays : | 2 |
Questions on SCR02 - Intelligent relay controller
No questions asked yet
Register or Login to ask a question.Related Products
-
SRF04 Low Cost Ultrasonic Range Finder
The SRF04 was designed to be just as easy to use as the Polaroid sonar, requiring a short trigger pulse and providing an echofalse -
SRF08 High Performance Ultrasonic Range Finder
Range 3cm -6m -
SRF10 Miniature Ultrasonic Range Finder
Range 3cm -6m -
SRF235 Ultrasonic sensor narrow beam SRF235
The SRF235 is a small sonar with an industrial air coupled transducer, giving a very narrow 15? beam width. -
SRF05 Low Cost Ultrasonic Range Finder
Low cost ultrasonic rangefinder, measures from 1cm to 4meters. Easy to use. -
SRF02 SRF02 Ultrasonic range finder
The SRF02 is a single transducer ultrasonic rangefinder in a small footprint PCB. It features both I2C and a Serial interfaces. -
SRF01 SRF01 Ultrasonic range finder
The SRF01 is a single transducer ultrasonic rangefinder in a very small footprint PCB. Connection is to a single pin Serial ifalse -
SRF485WPR RS485 Sonar with Weatherproof Transducer & Temp. Compensat
The SRF485WPR is a water resistant single transducer ultrasonic ranger. The SRF485WPR uses the RS485 standard for communicatifalse -
SRF485 RS485 Interfaced Sonar with Temp. Compenstation
The SRF485 is a single transducer ultrasonic ranger, based on our original SRF02 design. The SRF485 uses the RS485 standard ffalse