808141 SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome

SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome

The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD.
Categories
Prices are VAT included
€45.13 Price
€36.99 + VAT

Qty
 

Details

The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-refresh rates of an LCD. This model has a matt silver background, and pixels show up as little mirrors for a silver-reflective display, a really beautiful and unique look. It does not have a backlight, but it is daylight readable. For dark/night reading you may need to illuminate the LCD area with external LEDs. 

The display is 3V powered and 3V logic, so we placed it on a fully assembled & tested breakout board with a 3V regulator and level shifting circuitry. The display slots into a ZIF socket on board and we use a piece of double-sided tape to adhere it onto one side. There are four mounting holes so you can easily attach it to a box. 

The display is 'write only' which means that it only needs 3 pins to send data. However, the downside of a write-only display is that the entire 96x96 bits (1,152 bytes) must be buffered by the microcontroller driver. On an Arduino Uno/Leonardo that's half the RAM available and so it might not be possible to run this display with other RAM-heavy libraries like SD interfacing. 

We don't have a detailed tutorial yet but its very easy to get started. Solder the included header to the display and connect Vin to 3-5V, GND to ground, and SCK, DI and CS to three Arduino pins. Then download and install our SHARP Memory Display library and the Adafruit GFX library. Run the example sharpmemtest sketch with the correct data pins to start drawing lines, circles, rectangles, text, etc! 

Datasheet for the LS013B4DN04

  • Display dimensions (viewable): 24.192mm (H) × 24.192mm (V)
  • Dot pitch): 0.252 (H) × 0.252 (V)
  • Display size: 3.4cm / 1.3" diagonal
  • Current draw depends on refresh rate: with 1Hz data refresh, its 12uW (4uA @ 3.3V)
  • PCB Dimensions: 39.96mm / 1.57" x 39.6mm / 1.55" x 4.84mm / 0.19"
  • Weight: 7.94g
Adafruit Sharp Memory Display Breakout Ultra-Low Power, Daylight Visible Display Tutorial

Specifications

Part. No. : 1393
Shield Type : Display
Interface : SPI

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Graphic LCD 84x48 - Nokia 5110

    710168 Graphic LCD 84x48 - Nokia 5110

    The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen.false
    Excl. Tax:
    €7.70
    Incl. Tax:
    €9.39
      Compare
  2. SparkFun Micro OLED Breakout

    713003 SparkFun Micro OLED Breakout

    This breakout is perfect for adding graphics to your next Arduino project, displaying diagnostic information without resortinfalse
    Excl. Tax:
    €11.54
    Incl. Tax:
    €14.08
      Compare

Price Match



* Required Fields