Details
The Si7021 is a low-cost, easy-to-use, highly accurate, digital humidity and temperature sensor. This sensor is ideal for environmental sensing and data logging and perfect for build a weather stations or humidor control system. All you need are two lines for I2C communication, and you’ll have relative humidity readings and very accurate temperature readings as a bonus!
There are only four pins that need to be hooked up in order to start using this sensor in a project. One for VCC, one for GND, and two data lines for I2C communication. This breakout board has built-in 4.7KΩ pullup resistors for I2C communications. If you’re hooking up multiple I2C devices on the same bus, you may want to disable these resistors.
Note: Full drops of water can damage the sensor. We recommend wrapping the board in Teflon/irrigation tape for extreme conditions where water droplets may find their way onto the sensor.
Dimensions: 0.6" x 0.6"
Documents:
- Schematic
- Eagle Files
- Datasheet (Si7021)
- Hookup Guide
- GitHub (Design Files & Example Code)
- GitHub (Library)
Specifications
Part. No. : | SEN-13763 |
Questions on SparkFun Humidity and Temperature Sensor Breakout - Si7021
No questions asked yet
Register or Login to ask a question.Related Products
-
713683 SparkFun Humidity and Temperature Sensor Breakout - SHT15
The SHT15 Breakout is an easy to use, highly accurate, digital temperature and humidity sensor. This board has been fully calfalse -
808788 Adafruit Si7021 Temperature & Humidity Sensor Breakout Board
This lovely sensor for Silicon labs has ± 3% relative humidity measurements with a range of 0–80% RH, and ±0.4 °C temperaturefalse -
713956 SparkFun Weather Shield
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidityfalse -
714525 SparkFun RedBoard Edge
Scheda Arduino compatibile, pronta per essere montata a pannello. Ha tutte le caratteristiche della scheda RedBoard con i confalse -
211001 HUM1001 - Humidity Phidget
Sensore infrarosso per applicazioni dove e' richiesto il rilevamento di un oggetto che passando nel sensore interrompe il fasfalse