Details
The CryptoShield is a dedicated security peripheral for the Arduino and was made in collaboration with a previous Hacker In Residence, Josh Datko. This shield adds specialized ICs that perform various cryptographic operations which will allow you to add a hardware security layer to your Arduino project. It also is a nice device for those performing embedded security research. Needless to say this is a great product for those of you who are interested in computer security!
On board each CryptoShield is a slew of hardware fresh for your use: a real time clock (RTC) module to keep accurate time, a trusted platform module (TPM) for RSA encryption/decryption and signing in the hardware, an AES-128 encrypted EEPROM, an ATSHA204 authentication chip that performs SHA-256 and HMAC-256, and an ATECC108 that performs the Elliptic Curve Digital Signature Algorithm (ECDSA). Unlike its cousin, the CryptoCape, we’ve shrunk the prototyping area but added an RFID socket that works best with a ID-12LA module.
Each CryptoShield will need to have headers soldered on once you receive it. We prefer to give you the choice of soldering on stackable or non-stackable headers, whatever fits best for you project. The only other items you will need to get the CryptoCape fully functional are a dev board that supports the Arduino R3 form-factor and a CR1225 coin cell battery. All of these additional parts can be found in the Recommended Products section below.
Note: A portion of each sale is given back to Josh Datko for continued development of new and exciting Cryptographic tools.
Features:
- Encryption and Decryption Hardware Pre-Installed
- Encrypted EEPROM
- RSA Encryption/Decryption
- SHA-256 & HMAC-256
- Elliptic Curve Digital Signature Algorithm
- RFID Socket
- Prototyping Area
Documents:
- Schematic
- Eagle Files
- Hookup Guide
- Datasheets:
- ATAES132 (AES-128)
- DS3231MZ/V+ (RTC)
- AT97SC3204T (TPM)
- ATSHA204 (SHA-256)
- ATECC108 (ECC)
- CCATS
- GitHub (Design Files)
Specifications
Part. No. : | DEV-13183 |
Interface : | SPI |
Voltage : | 5 |
Shield Type : | Communication, Utility |
Related Products
-
709279 Arduino Stackable Header - 8 Pin
This is a 8-pin female header, with extra long legs -- great for stacking Arduino shields. -
709280 Arduino Stackable Header - 6 Pin
This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. -
500143 Arduino UNO R3 con microcontrollore ATmega328
This is the new Arduino Uno R3. In addition to all the features of the previous board, the Uno now uses an ATmega16U2 insteadfalse -
711376 Arduino Stackable Header - 10 Pin
This is a 10-pin female header, with extra long legs -- great for stacking R3-compatible Arduino shields