713845 SparkFun Motor Driver - Dual TB6612FNG (with Headers)

SparkFun Motor Driver - Dual TB6612FNG (with Headers)

STMicro's L6470 is a 3A, 8-45V bipolar stepper motor driver. It has built-in overcurrent detection, undervoltage detection, overtemperature detection, stall detection, a 5-bit ADC, and a switch input that can be used for either user jog control or as a hard stop function.
Categories
Prices are VAT included
€9.15 Price
€7.50 + VAT

Qty
 

Details

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, and the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. Due to popular demand, this version of the SparkFun Motor Driver includes pre-soldered male headers for ease of use. With the headers already soldered on, you can jump right in to using this little board without any assembly!

Logic supply voltage (VCC) can be in the range of 2.7–5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).

The board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.

GET STARTED WITH THE MOTOR DRIVER HOOKUP GUIDE

Features:

  • Power supply voltage: VM=15V max, VCC=2.7–5.5V
  • Output current: Iout=1.2A(average) / 3.2A (peak)
  • Standby control to save power
  • CW/CCW/short brake/stop motor control modes
  • Built-in thermal shutdown circuit and low voltage detecting circuit
  • All pins of the TB6612FNG broken out to 0.1" spaced pins
  • Filtering capacitors on both supply lines
  • Pre-soldered headers

Documents:

Specifications

Part. No. : BOB-13845

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Questions on SparkFun Motor Driver - Dual TB6612FNG (with Headers)

No questions asked yet

Register or Login to ask a question.
Register or Login to ask a question.
  1. Motor Driver 1A Dual TB6612FNG

    709457 Motor Driver 1A Dual TB6612FNG

    The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak)
    Excl. Tax:
    €6.41
    Incl. Tax:
    €7.82
      Compare
  2. SparkFun Ludus Protoshield Wireless

    713295 SparkFun Ludus Protoshield Wireless

    The SparkFun Ludus Protoshield Wireless is an Arduino compatible shield designed to make connecting motors and sensors to youfalse
    Excl. Tax:
    €19.24
    Incl. Tax:
    €23.47
      Compare

Price Match



* Required Fields