This NEMA 23-size hybrid stepping motor can be used as a unipolar or bipolar stepper motor and has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 3.6 V, allowing for a holding torque of 9 kg-cm (125 oz-in).
This high-torque hybrid stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 2 A at 3.6 V, allowing for a holding torque of 9 kg-cm (125 oz-in). The motor has six color-coded wires terminated with bare leads that allow it to be controlled by both unipolar and bipolar stepper motor drivers. When used with a unipolar stepper motor driver, all six leads are used. When used with a bipolar stepper motor driver, the center-tap yellow and white wires can be left disconnected (the red-blue pair gives access to one coil and the black-green pair gives access to the other coil). We recommend using it as a bipolar stepper motor.
- Size: 56.4 mm square × 56 mm, not including the shaft (NEMA 23)
- Weight: 0.7 kg (25 oz)
- Shaft diameter: 1/4″ (6.35 mm) “D”
- Steps per revolution: 200
- Current rating: 2 A per coil
- Voltage rating: 3.6 V
- Resistance: 1.8 Ohm per coil
- Holding torque: 9 kg-cm (125 oz-in)
- Inductance: 2.5 mH per coil
- Lead length: 12 in
More specifications are available in the datasheet (49k pdf).
Stepper Motor Applications
Stepper motors are generally used in a variety of applications where precise position control is desirable and the cost or complexity of a feedback control system is unwarranted. Here are a few applications where stepper motors are often found:
- CNC machines
- 3D printer/prototyping machines
- Laser cutters
- Pick and place machines
- Linear actuators
- Hard drives
|Part. No. :||1473|
|Shaft Diam. mm :||6.35|
Questions on Stepper Motor: Unipolar/Bipolar, 200 Steps/Rev, 57×56mm, 3.6V, 2 A/Phase
No questions asked yetRegister or Login to ask a question.
Excl. Tax:€103.90Incl. Tax:€126.76
Excl. Tax:€6.66Incl. Tax:€8.13
Excl. Tax:€47.52Incl. Tax:€57.97
Excl. Tax:€50.92Incl. Tax:€62.12