Details
The SyRen motor driver is one of the most versatile, efficient and easy to use motor drivers on the market. It is suitable for medium powered robots - up to 50lbs in combat or 180lbs for general purpose robotics.
Out of the box, the SyRen 20 can supply a single DC brushed motor with up to 20A continuously. Peak currents of 30A are achievable for a few seconds.
Overcurrent and thermal protection means you'll never have to worry about killing the driver with accidental stalls or by hooking up too big a motor.
With just one SyRen driver you can control a motor with: analog voltage, radio control, serial and packetized serial. You can build many different robots of increasing complexity for years to come with a SyRen. Owning two SyRens allows you to build differential drive (tank style) robots because they can work in tandem with built in mixing.
The operating mode is set with the onboard DIP switches so there are no jumpers to lose. The SyRen features screw terminal connectors - making it possible for you to build a robot without even soldering.
SyRen is the first synchronous regenerative motor driver in its class. The regenerative topology means that your batteries get recharged whenever you command your robot to slow down or reverse. SyRen also allows you to make very fast stops and reverses - giving your robot a quick and nimble edge.
SyRen has a built in 5V BEC that can provide power to a microcontroller or R/C receiver. The lithium cutoff mode allows SyRen to operate safely with lithium ion and lithium polymer battery packs - the highest energy density batteries available.
SyRen's transistors are switched at ultrasonic speeds (32kHz), meaning no one will be able to hear your robot ninja army approaching.
Technical Specifications: | |
Power - Up to 18V in | 20A continuous, 30A peak |
Power - Up to 24V in | 16A continuous, 20A continuous with additional heatsinking/airflow, 30A peak |
Protection | Thermal - Overcurrent |
Input Modes | Analog, R/C, simplified serial, packetized serial |
Features | Synchronous regenerative drive Ultra-sonic switching frequency Thermal and overcurrent protection Lithium protection mode |
Dimensions | 61 x 58 x 21mm |
Weight | 55 grams |
Applications | Combat robots up to 30lb Normal and hobby robots up to 100lb Differential drive robots Electric vehicles, ride-on toys, scooters Easy speed/direction control for pumps, conveyors, automation and any application that uses a brushed DC motor |
Example Projects and Utilities :
Questions on SyRen25 25A Motor Controller
No questions asked yet
Register or Login to ask a question.Related Products
-
581451 1451 - VNH5019 Motor Driver Carrier
This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). false -
330027 Kangaroo x2 motion controller
Kangaroo x2 adds self-tuning feedback motion control to your Sabertooth or SyRen motor driver. It can be used with quadraturefalse -
MD04 MD04 - 20A H-Bridge
The MD04 is a medium power motor driver, designed to supply power beyond that of any of the low power single chip H-Bridges tfalse -
808714 Sabertooth dual 60A motor driver
Sabertooth 2x60 can supply two DC brushed motors with up to 60A each. Peak currents of 120A per channel are achievable for a false