Details
This is the T5403 breakout board, a fully calibrated barometric pressure sensor with an I2C interface. The T5403 sensor measures the absolute pressure of the air around. This pressure varies with both the weather and altitude. Depending on how you interpret the data, you can monitor changes in the weather, measure altitude, or any other tasks that require an accurate pressure reading.
The T5403 sensor consists of a piezoresistive MEMS pressure sensor element and an ASIC (application specific integrated circuit) with integrated temperature sensor, analog to digital converter ADC, memory and digital circuitry. Each breakout requires a supply voltage of 1.7V to 3.6V with a low current consumption of 790µA max and each pin (GND, VCC, SCL/SCLK, SDA/MOSI, MISO, RST/&SS, SEL, and EOC) broken out.
Features:
- Supply Voltage: 1.7-3.6V
- Max Current Consumption: 790µA
- Pressure Range: 300hPa - 1100hPa
- I2C Interface
- 16 bit ADC
- Internal Oscilator
Documents:
- Schematic
- Eagle Files
- Datasheet
- Hookup Guide
- GitHub (Design Files)
Specifications
Part. No. : | SEN-12039 |
Questions on T5403 Barometric Sensor Breakout
No questions asked yet
Register or Login to ask a question.Related Products
-
709721 MPL115A1 Barometric Pressure Sensor Breakout
Now mounted on a breakout board, the MPL115A1 is a digital barometric pressure sensor that uses MEMs technology to give accurfalse -
713956 SparkFun Weather Shield
The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidityfalse -
714525 SparkFun RedBoard Edge
Scheda Arduino compatibile, pronta per essere montata a pannello. Ha tutte le caratteristiche della scheda RedBoard con i confalse