Details
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy LC (Low Cost) is a 32 bit microcontroller board that provides you with an uncomplicated option for getting started with the Teensy line of products without breaking the bank!
The Teensy LC comes pre-flashed with a bootloader so you can program it using the on-board USB connection: No external programmer needed! You can program for the Teensy in your favorite program editor using Cor you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for Teensy!
The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32 bit processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access and an I2S digital audio interface! There are also 2 separate interval timers! Also, the Teensy LC can provide system voltage of 3.3V or 5V to other devices at up to 5-20mA.
All of this functionality is jammed into a 1.4 x 0.7 inch board with all headers on a 0.1" grid so you can slap it on a breadboard and get to work! So, what sets the Teensy LC apart from the Teensy 3.1? First off, this version has been streamlined to be as cost effective as possible. Obviously, the LC doesn’t share a lot of power that the 3.1 possesses but by no means does it make the LC a ‘weak’ board! The Teensy LC is equipped with 8kB RAM, 62kB of flash memory, and 27 Digital I/O pins with 13 high res Analog inputs.
Note: The Teensy LC does not come with a micro-B USB cable, please check the Recommended Products section below for an appropriate one.
Dimensions: 1.4 x 0.7" (~35 x 18 mm)
Features:
- 32 bit ARM Cortex-M0+ 48 MHz CPU
- 62kB Flash Memory, 8kB RAM, 1/8(emu)kB EEPROM
- 13 High Resolution Analog Inputs
- 27 Digital I/O Pins (NOT 5V Tolerant)
- 10 PWM outputs
- 7 Timers for intervals/delays, separate from PWM
- 3 UARTs (serial ports)
- SPI, I2C, & I2S
- I2S (for high quality audio interface)
- 4 Lightweight DMA channels
- Touch Sensor Inputs
Documents:
- Teensy Quickstart
- Teensyduino Software
- Pin Assignment Chart
- Product Page
Specifications
Part. No. : | TEENSYLC |
Related Products
-
315002 Male Strip 2,54 - 40 pin
-
315017 Male Strip 2,54 - 40 pin - Red
-
310018 USB A to Micro B cable, 100 cm
USB A to Micro B cable, 100 cm -
712767 Teensy Audio Board
This audio board provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy false -
807740 OctoWS2811 Adapter for Teensy 3.1 - Control tons of NeoPixels!
This adapter board connects the Teensy 3.1 to up to thousands of WS2811/WS2812 (a.k.a NeoPixel) LEDs using the OctoWS2811 Libfalse -
713288 Teensy Arduino Shield Adapter
The Teensy Arduino Shield Adapter allows you to attach your Teensy and utilize your favorite Arduino shields without the requfalse -
713311 Teensy 3.1 XBee Adapter
The Teensy 3.1 XBee Adapter allows you to connect your Teensy with the tried and true XBee series to provide you with a greatfalse -
808645 Teensy 3.2 - with Header Pins
The Teensy is a breadboard-friendly development board with loads of features in a, well, teensy package. The Teensy 3.2 bringfalse -
808646 Teensy LC - with Header Pins
Teensy-LC delivers an impressive collection of capabilities to make modern electronic projects simpler. It features an ARM Cofalse -
808647 Prop Shield With Motion Sensors
This shield features 10DOF motion sensors, 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flfalse -
808648 Prop Shield, Low Cost (no Motion Sensors)
This shield features a 2 watt audio amp, high speed 5V buffers for driving APA102 LEDs, and an 8 Mbyte flash memory for imagefalse -
808744 WIZ820io & Micro SD Card Adaptor
This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ820io ethernet module with Teensy false -
713925 Teensy Header Kit
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. -
714017 Raspberry Pi GPIO Tall Header - 2x20
This 2x20 “tall” header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability tofalse -
809290 Teensy 3.6 with Header Pins
Version 3.6 features a 32 bit 180 MHz ARM Cortex-M4 processor with floating point unit. All digital and analog pins are 3.3 vfalse -
809434 Teensy 4.1
Il Teensy 4.1 equipaggiato con processore ARM Cortex-M7 a 600MHz e' il microcontrollore piu' veloce disponibile oggi sul mercato.