Details
The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. With this board you can pull MP3 files from an microSD card and play them using only one shield, effectively turning any Arduino into a fully functional stand-alone MP3 player! The MP3 Shield utilizes the VS1053B MP3 audio decoder IC to decode audio files. The VS1053 is also capable of decoding Ogg Vorbis/MP3/AAC/WMA/MIDI audio and encoding IMA ADPCM and user-loadable Ogg Vorbis.
The VS1053 receives its input bitstream through a serial input bus (SPI). After the stream has been decoded by the IC, the audio is sent out to both a 3.5mm stereo headphone jack, as well as a 2-pin 0.1" pitch header.
This shield comes populated with all components as shown in the images and schematic; but it does not come with headers installed. We recommend the Arduino R3 Stackable Header.
Features:
- 3.5mm audio out jack
- 0.1" spaced header for speaker out
- microSD card slot
Documents:
- Schematic
- Eagle Files
- Datasheet (VS1053B)
- Hookup Guide
- GitHub (Design Files, Library, & Example Code)
Specifications
Part. No. : | DEV-12660 |
Interface : | SPI |
Voltage : | 5 |
Shield Type : | Music |
Related Products
-
501381 VS1053 Codec + MicroSD Breakout - MP3/WAV/MIDI/OGG Play + Record
This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of aufalse -
807746 Adafruit "Music Maker" MP3 Shield for Arduino
This powerful shield features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats sfalsePrices VAT incl.
Compare -
120299 DFPlayer - A Mini MP3 Player For Arduino
The DFPlayer Mini is a small and low cost MP3 module with an simplified output directly to the speaker. -
120070 Multi USB/RS232/RS485/TTL Converter
Multiplexer has a set of interfaces for a variety of multi-function adapter plates. It supports USB, TTL, RS232, RS485 interffalse -
715165 SparkFun Qwiic MP3 Trigger
Player per file MP3, basta inviare un comando tramite I2C per suonare qualsiasi file MP3 presente nella scheda SD -
121304 Gravity: UART MP3 Voice Module
Questo modulo puo' memorizzare oltre 200 file audio e riprodurre file MP3 e WAV -
715353 SparkFun Nano Power Timer - TPL5110
Timer a basso consumo, utile per creare una sorta di watchdog, se non riceve segnali dal microcontrollore per un tempo preimpfalse -
714685 SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)
Scheda Mux, per connettere fino a 8 dispositivi I2C, anche con lo stesso indirizzo. L'indirizzo del Mux e' modificabile, e' pfalse