3-AXIS ACCELEROMETER BOARD WITH AT91SAM7S64 ARM7 MICROCONTROLLER AND USB INTERFACE AND FLASH MEMORY FOR LOGGING

MCU: ADuC7020 - ARM7TDMI Core, 16/32-bit RISC architecture, 5 Channels 12-bit, 1MSPS ADC, Differential and single-ended modes, 0 to Vref Analog Input Range, 4 Outputs 12-bit Voltage Output DACs, On-Chip 20ppm/°C Voltage Reference, On-Chip Temperature Sensor (±3°C), Uncommitted Voltage Comparator, JTAG Port, Clocking options: Trimmed On-Chip Oscillator (± 2%), External Watch crystal, External clock source

ADuC-M7020 is complementary board for ADuC-H7020 which allow better to be explored ADuC7020 features without the need for additional soldering as this board provide USB-RS232 converter for link with PC, two buttons, potentiometers, status LEDs so you can play with ADuC-H7020 out of the box.

ADuC-P7026 is low cost development board for Analog Devices ADuC7026 ARM7 microcontroller. Among the unique features for this microcontroller are the 1Msps ADCs and DACs, 3 phases PWM module which are not available from other ARM vendors. ADuC7026 have build in bootloader which could be used to load code in the microcontroller without need for external programmer.

MCU: LPC2148 16/32 bit ARM7TDMI-S? with 512K Bytes Program Flash, 42K Bytes RAM, USB 2.0, RTC, 10 bit ADC 2.44 uS, 2x UARTs, 2x I2C, SPI, 2x 32bit TIMERS, 6x PWM, 8x CCR, 1x DAC, WDT, 5V tolerant I/O, up to 60MHz operation

MCU: LPC2106 16/32 bit ARM7TDMI-S? with 128K Bytes Program Flash, 64K Bytes RAM, RTC, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation

MCU: LPC2129 16/32 bit ARM7TDMI-S? with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation

DEVELOPMENT PROTOTYPE BOARD WITH LPC2378 Ethernet, USB, 2x CAN, 2xRS232, ETHERNET, SD/MMC, AUDIO IN-OUT

DEVELOPMENT BOARD FOR STR750 ARM7TDMI-S MICROCONTROLLER

First on market three-in-one USB JTAG debugger - offers JTAG + RS232 (full modem signals supported) port + power supply all in one compact device