341093 1093 - Pololu 30:1 Micro Metal Gearmotor HP

1093 - Pololu 30:1 Micro Metal Gearmotor HP

Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di riduzione 30:1. 1000RPM a 6V. Assorbimento a vuoto di 120mA. Coppia: 0.6Kg*cm
Categorie
Prezzi IVA inclusa
€ 21,96 Prezzo
€ 18,00 + VAT

Qty
 

Dettagli

 

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, high-power motor with 30:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 1000 RPM and 120 mA free-run, 9 oz-in (0.6 kg-cm) and 1.6 A stall.

These tiny, high-quality motors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and offer a choice between two different motors: high-power (HP) and standard. With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change. Please see the micro metal gearmotor comparison table for detailed specifications of all our micro metal gearmotors. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application.

Some versions of the gearmotors are sold with an additional 1mm-diameter output shaft that protrudes from the rear of the motor. This 4.5mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add a custom-built encoder to provide motor speed or position feedback.

Dimensions

The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). It weighs approximately 0.35 oz (10 g). Dimensions in mm:

 

Dimensions

Size: 24 x 10 x 12 mm
Weight: 0.34 oz
Shaft diameter: 3 mm

General specifications

Gear ratio:

30:1
Free-run speed @ 6V: 1000 rpm
Free-run current @ 6V: 120 mA
Stall current @ 6V: 1600 mA
Stall torque @ 6V: 9 oz·in
Extended motor shaft?: N

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 1093 - Pololu 30:1 Micro Metal Gearmotor HP

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Ruote Pololu Wheel 32x7mm Coppia - Bianche

    270026 Ruote Pololu Wheel 32x7mm Coppia - Bianche

    Misurano 32mm di diametro, si adattano direttamente ai micromotoriduttori Sanyo e simili. Vendute in coppia
    Tasse escluse:
    € 3,23
    IVA inclusa:
    € 3,94
      Confronta
  2. Supporti Pololu Micro Metal Gearmotor Bracket Coppia - Nero

    270027 Supporti Pololu Micro Metal Gearmotor Bracket Coppia - Nero

    Coppia staffe in plastica per motoriduttori in miniatura Sanyo e simili.
    Tasse escluse:
    € 4,53
    IVA inclusa:
    € 5,53
      Confronta
  3. 1099 - Pololu 10:1 Micro Metal Gearmotor

    341099 1099 - Pololu 10:1 Micro Metal Gearmotor

    Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse
    Tasse escluse:
    € 19,00
    IVA inclusa:
    € 23,18
      Confronta
  4. 992 - Pololu 100:1 Micro Metal Gearmotor

    340992 992 - Pololu 100:1 Micro Metal Gearmotor

    Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse
    Tasse escluse:
    € 18,00
    IVA inclusa:
    € 21,96
      Confronta
  5. 998 - Pololu 50:1 Micro Metal Gearmotor HP

    340998 998 - Pololu 50:1 Micro Metal Gearmotor HP

    Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse
    Tasse escluse:
    € 19,00
    IVA inclusa:
    € 23,18
      Confronta
  6. 298:1 Micro Metal Gearmotor HP

    582512 298:1 Micro Metal Gearmotor HP

    Micromotoriduttore in metallo rapporto di riduzione 298:1, versione HP (high-power)
    Tasse escluse:
    € 13,08
    IVA inclusa:
    € 15,96
      Confronta
  7. 2361 - 75:1 Micro Metal Gearmotor HP

    341162 2361 - 75:1 Micro Metal Gearmotor HP

    This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-power brushed DC motor with 75.81:1 metal gearbox,false
    Tasse escluse:
    € 19,00
    IVA inclusa:
    € 23,18
      Confronta
  8. 1163  - 73:1 Metal Gearmotor 20Dx42L mm

    341163 1163 - 73:1 Metal Gearmotor 20Dx42L mm

    These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 73:1 metal gearbox with a 0.2false
    Tasse escluse:
    € 16,30
    IVA inclusa:
    € 19,89
      Confronta
  9. 3452 - 63:1 Metal Gearmotor 20Dx43L mm 6V

    343452 3452 - 63:1 Metal Gearmotor 20Dx43L mm 6V

    Questi piccoli motoriduttori a spazzole hanno una grande potenza per le loro dimensioni. Questa versione ha un motore a 6V cofalse
    Tasse escluse:
    € 16,30
    IVA inclusa:
    € 19,89
      Confronta