Dettagli
Need to measure something damp? This epoxy-coated precision 1% 10K thermistor is an inexpensive way to measure temperature in weather or liquids. The resistance in 25 °C is 10K (+- 1%). The resistance goes down as it gets warmer and goes up as it gets cooler. For specific temperature-to-resistance, check the lookup table.
These are often used for air conditioners, water lines, and other places where they can get damp. The PVC coating of the wires is good up to 105 °C so this isn't good for very hot stuff.
We even toss in an additional 1% 10K resistor which you can use as calibration or for a resistor divider.
We have a great detailed tutorial on how thermistors work and how to use this one best
- Resistance at 25 degrees C: 10K +- 1%
- B25/50 = 3950+- 1%
- Thermal time constant <= 15 seconds
- Thermistor temperature range -55 °C to 125 °C
- 28 AWG PVC Wire
Dimensions:
- Diameter: 3.5mm/0.13in
- Length: 18in/45cm
Specifiche
Part. No. : | 372 |
Questions on 10K Precision Epoxy Thermistor
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
710988 TMP36 - Sensore di temperatura analogico
Il TMP36 è un sensore di temperatura analogico molto economico e preciso, in formato TO-92. Fornisce un'uscita analogica linfalse -
709438 LM335A - Sensore di temperatura analogico
l' LM335A è un sensore di temperatura analogico calibrato in gradi Kelvin. Il valore restituito è direttamente proporzionale false -
115119 One Wire Temperature Sensor - DS18B20
Sensore di temperatura con capsula metallica, basato sul diffusissimo DS18B20, protocollo one wire. -
714049 DS18B20 - Sensore di temperatura digitale
Sensore di temperatura digitale DS18B10 prodotto dalla Maxim. Riporta la temperatura in un range da -55 a 125°C con una precifalse