Salta il contenuto

Lingua

SKU 191203

1203 - PhidgetTextLCD 20X2 : White : Integrated PhidgetInterface

Esaurito
Prezzo originale €166,77 - Prezzo originale €166,77
Prezzo originale
€166,77
€166,77 - €166,77
Prezzo attuale €166,77

Tutti i prezzi sono IVA inclusa

Disponibilità:
Esaurito
Richiesta Sconto per Quantita' e Informazioni

 

 

The 1203 integrates a 20X2 White PhidgetTextLCD, and a PhidgetInterfaceKit 8/8/8

The PhidgetTextLCD allows you to display messages on a 2-line by 20-character LCD screen.

The PhidgetInterfaceKit 8/8/8provides:

Analog Inputs

The Analog Inputs are used to measure continuous quantities, such as temperature, humidity, position, pressure, etc. Phidgets offers a wide variety of sensors that can be plugged directly into the board using the cable included with the sensor.

Sampling rates can be set at 1ms, 2ms, 4ms, 8ms and multiple of 8ms up to 1000ms.

Product Specifications

Characteristic Value
Analog Inputs
Impedance 900K ohms
5V Reference Error Max 0.5%
Update Rate 1000 samples/second max for 4 channels
500 samples/second max for all 8 channels
Digital Inputs
Pull-Up Resistance 15K ohms
Low Voltage (True) 1.25V Max
High Voltage (False) 3.75V Min
Maximum Voltage ±15V
Update Rate ~125 samples/second
Recommended Wire Size 16-26 AWG
Wire Stripping 5-6mm strip
Digital Outputs
Series Resistance 300 ohms
Update Rate ~125 samples/second
Recommended Wire Size 16-26 AWG
Board
USB-Power Current Specification Max 500 mA
Quiescent Current Consumption 13 mA
Available External Current (source) 487 mA

 

 

 

Product Features

  • 2-line by 20-character LCD White Display
  • 8 Analog Inputs with configurable data acquisition rates
  • 8 Digital Inputs with hardware noise filtering
  • 8 Digital Outputs
  • 5V terminal block besides Analog Input 7 and Digital Output 7
 

Digital Inputs

The Digital Inputs have a Digital Input Hardware Filter to eliminate false triggering from electrical noise. They can be used to convey the state of devices such as push buttons, limit switches, relays, and logic levels.

Digital Outputs

The Digital Outputs can be used to drive LEDs, solid state relays (such as the 3052 SSR Relay Board), transistors; in fact, anything that will accept a CMOS signal.

Comes packaged with:

  • A 3018 - Mini-USB Cable 180cm
  • A mounting hardware kit

Resources

Previous versions of the Product Manual