Dettagli
This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 280 mA at 7.4 V, allowing for a holding torque of 650 g-cm (9 oz-in). The motor has four color-coded wires terminated with bare leads.
Our 5mm universal mounting hub (see related products) can be used to mount objects on the stepper motor’s 5mm-diameter output shaft.
Specifications
- Size: 35 mm square x 26 mm, not including the shaft (NEMA 14)
- Weight: 130 g (4.5 oz)
- Shaft diameter: 5 mm
- Steps per revolution: 200
- Current rating: 280 mA per coil
- Voltage rating: 7.4 V
- Resistance: 26 Ohm per coil
- Holding torque: 650 g-cm (9 oz-in)
- Inductance: 19.2 mH per coil
- Lead length: 12 in
Dimensions
The following diagram shows the stepper motor dimensions in mm. The dimension labeled “length” is 26 mm. The output shaft has a length of 21 mm and a diameter of 5 mm.
Specifiche
Part. No. : | 1207 |
NEMA : | 14 |
WINDING : | Bipolar |
Diam. Asse mm : | 5 |
Questions on 1207 - Motore Stepper bipolare NEMA-14 35x26mm
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
342128 2128 - A4988 Stepper Motor Driver Carrier, Black Edition
This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrefalse -
342257 Pololu Stamped Aluminum L-Bracket for NEMA 14 Stepper Motors
This black anodized aluminum bracket lets you securely mount typical NEMA 14-size stepper motors to your project. The bracketfalse