807969 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket

2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket

This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display.
Categorie
Prezzi IVA inclusa
€ 33,84 Prezzo
€ 27,74 + VAT

 

Dettagli

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen.

This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you'll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analog) or you can purchase and use our resistive touchscreen controller (not included) to use I2C or SPI

We wrapped up this display into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use with any microcontroller. If you're going with SPI mode, you can also take advantage of the onboard MicroSD card socket to display images. (microSD card not included, but any will work)

Of course, we wouldn't just leave you with a datasheet and a "good luck!". For 8-bit interface fans we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text, and moreFor SPI users, we have a library as well, its separate from the 8-bit library since both versions are heavily optimized. We also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it.

Follow our step by step guide for wiring, code and drawing. You'll be running in 15 minutes

If you are using an Arduino-shaped microcontroller, check out our TFT shield version of this same display, with SPI control and a touch screen controller as well

Specifications:

Specifiche

Part. No. : 1770

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Resistive Touch Screen Controller - STMPE610

    807548 Resistive Touch Screen Controller - STMPE610

    This breakout board features the STMPE610, which has both I2C and SPI interfaces available. There is also an interrupt pin thfalse
    Tasse escluse:
    € 9,25
    IVA inclusa:
    € 11,29
      Confronta
  2. PiTFT - Assembled 320x240 2.8" TFT+Touchscreen for Raspberry Pi

    807604 PiTFT - Assembled 320x240 2.8" TFT+Touchscreen for Raspberry Pi

    2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interfacefalse
    Tasse escluse:
    € 32,36
    IVA inclusa:
    € 39,48
      Confronta
  3. 3.5" TFT 320x480 + Touchscreen Breakout Board w/MicroSD Socket

    807973 3.5" TFT 320x480 + Touchscreen Breakout Board w/MicroSD Socket

    This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The difalse
    Tasse escluse:
    € 36,95
    IVA inclusa:
    € 45,08
      Confronta
  4. PiTFT - Assembled 480x320 3.5" TFT+Touchscreen for Raspberry Pi

    808002 PiTFT - Assembled 480x320 3.5" TFT+Touchscreen for Raspberry Pi

    3.5" display with 480x320 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interfacefalse
    Tasse escluse:
    € 41,55
    IVA inclusa:
    € 50,69
      Confronta
  5. 2.8" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket

    808004 2.8" TFT LCD with Cap Touch Breakout Board w/MicroSD Socket

    TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful! 240x320 pixels with individual RGB pixelfalse
    Tasse escluse:
    € 52,77
    IVA inclusa:
    € 64,38
      Confronta
  6. HDMI 5" Display Backpack - Without Touch

    808106 HDMI 5" Display Backpack - Without Touch

    The TFP401 is a beefy DVI/HDMI decoder from TI. It can take unencrypted video and pipe out the raw 24-bit color pixel data - false
    Tasse escluse:
    € 55,44
    IVA inclusa:
    € 67,64
      Confronta
  7. SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome

    808141 SHARP Memory Display Breakout - 1.3" 96x96 Silver Monochrome

    The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usfalse
    Tasse escluse:
    € 36,99
    IVA inclusa:
    € 45,13
      Confronta
  8. PiTFT 2.8" TFT 320x240 + Capacitive Touchscreen

    808277 PiTFT 2.8" TFT 320x240 + Capacitive Touchscreen

    Featuring a 2.8" display with 320x240 16-bit color pixels and a single-touch capacitive touch overlay.
    Tasse escluse:
    € 41,57
    IVA inclusa:
    € 50,72
      Confronta
  9. Adafruit PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen

    808343 Adafruit PiTFT Plus 320x240 2.8" TFT + Capacitive Touchscreen

    It features a 2.8" display with 320x240 16-bit color pixels and a capacitive touch overlay. That's right, instead of a rfalse
    Tasse escluse:
    € 41,57
    IVA inclusa:
    € 50,72
      Confronta
  10. Adafruit PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen

    808344 Adafruit PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen

    It features a 2.4" display with 320x240 16-bit color pixels and a resistive touch overlay. The HAT uses the high speed Sfalse
    Tasse escluse:
    € 32,32
    IVA inclusa:
    € 39,43
      Confronta
  11. PiTFT Plus 320x240 3.2" TFT + Resistive Touchscreen - Pi 2 and Model A+ / B+

    808404 PiTFT Plus 320x240 3.2" TFT + Resistive Touchscreen - Pi 2 and Model A+ / B+

    It features a 3.2" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speedfalse
    Tasse escluse:
    € 36,99
    IVA inclusa:
    € 45,13
      Confronta
  12. PiTFT Plus Assembled 320x240 2.8" TFT + Resistive Touchscreen - Pi 2 and Model A+ / B+

    808429 PiTFT Plus Assembled 320x240 2.8" TFT + Resistive Touchscreen - Pi 2 and Model A+ / B+

    It features a 3.2" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speedfalse
    Tasse escluse:
    € 32,32
    IVA inclusa:
    € 39,43
      Confronta
  13. HDMI 5" 800x480 Display Backpack - With Touchscreen

    808460 HDMI 5" 800x480 Display Backpack - With Touchscreen

    Its a mini panel-mountable HDMI monitor with a built-in touchscreen! So small and simple, you can use this display with any cfalse
    Tasse escluse:
    € 69,35
    IVA inclusa:
    € 84,61
      Confronta
  14. Monochrome 2.42" 128x64 OLED Graphic Display Module Kit

    808530 Monochrome 2.42" 128x64 OLED Graphic Display Module Kit

    These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display.The driver chip, SSD130false
    Tasse escluse:
    € 43,15
    IVA inclusa:
    € 52,64
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!