342377 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft

2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm extended motor shaft.
Categorie
Prezzi IVA inclusa
€ 16,86 Prezzo
€ 13,82 + VAT

Qty
 

Dettagli

This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 9.96:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. This version also has a 4.5 x 1 mm extended motor shaft.

Key specs at 6 V: 2200 RPM and 40 mA free-run, 3 oz-in (0.2 kg-cm) and 0.7 A stall.

These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and offer a choice between three different motors: high-power (HP), medium-power (MP), and standard. With the exception of the 1000:1 gear ratio versions, all of the micro metal gearmotors have the same physical dimensions, so one version can be easily swapped for another if your design requirements change. This dynamically-sortable table can help you find the gearmotor that offers the best blend of speed, torque, and current-draw for your particular application. A more basic comparison table is available below.

Some versions of the gearmotors are sold with an additional 1mm-diameter output shaft that protrudes from the rear of the motor. This 4.5mm-long rear shaft rotates at the same speed as the input to the gearbox and offers a way to add an encoder, such as our magnetic encoder for micro metal gearmotors, to provide motor speed or position feedback.

The gearbox has a long (0.365" or 9.27 mm), 3 mm-diameter D-shaped metal output shaft, and the brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35 mm thread pitch). The gearmotor weighs approximately 0.35 oz (10 g). Versions with the extended motor shaft have a 1mm diameter round shaft that protrudes 4.5 mm from the rear of the motor, between the two motor terminals; this is not pictured in the above dimension diagram. In terms of size, these gearmotors are very similar to Sanyo’s popular 12 mm NA4S DC gearmotors, and gearmotors with this form factor are often referred to as N20 motors.

Dimensions

Size: 24 x 10 x 12 mm
Weight: 0.34 oz
Shaft diameter: 3 mm

General specifications

Gear ratio: 9.96:1
Free-run speed @ 6V: 2200 rpm
Free-run current @ 6V: 40 mA
Stall current @ 6V: 700 mA
Stall torque @ 6V: 3 oz·in
Extended motor shaft?: Y

Specifiche

Part. No. : 2377
Diam. Asse mm : 3

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 2377 - 10:1 Micro Metal Gearmotor MP with Extended Motor Shaft

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Supporti Pololu Micro Metal Gearmotor Bracket Coppia - Nero

    270027 Supporti Pololu Micro Metal Gearmotor Bracket Coppia - Nero

    Coppia staffe in plastica per motoriduttori in miniatura Sanyo e simili.
    Tasse escluse:
    € 4,06
    IVA inclusa:
    € 4,95
      Confronta
  2. 1099 - Pololu 10:1 Micro Metal Gearmotor

    341099 1099 - Pololu 10:1 Micro Metal Gearmotor

    Motoriduttore in miniatura di elevata qualità, simile ai motoriduttori Sanyo da 12mm. Ingranaggi in metallo, rapporto di ridufalse
    Tasse escluse:
    € 13,01
    IVA inclusa:
    € 15,87
      Confronta
  3. 2381 - 100:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    342381 2381 - 100:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 100.37:1 metal gearbox, similar tofalse
    Tasse escluse:
    € 13,82
    IVA inclusa:
    € 16,86
      Confronta
  4. 2380 - 75:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    342380 2380 - 75:1 Micro Metal Gearmotor MP with Extended Motor Shaft

    This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 75.81:1 metal gearbox, similar to false
    Tasse escluse:
    € 13,82
    IVA inclusa:
    € 16,86
      Confronta
  5. 3080 - 1000:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343080 3080 - 1000:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox, making false
    Tasse escluse:
    € 18,08
    IVA inclusa:
    € 22,06
      Confronta
  6. 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343079 3079 - 298:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has false
    Tasse escluse:
    € 15,46
    IVA inclusa:
    € 18,86
      Confronta
  7. 3074 - 75:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343074 3074 - 75:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 75.81:1 metal gearbox. It has afalse
    Tasse escluse:
    € 13,22
    IVA inclusa:
    € 16,13
      Confronta
  8. 3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343076 3076 - 150:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has false
    Tasse escluse:
    € 15,46
    IVA inclusa:
    € 18,86
      Confronta
  9. 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    343072 3072 - 30:1 Micro Metal Gearmotor HPCB with Extended Motor Shaft

    This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has afalse
    Tasse escluse:
    € 13,85
    IVA inclusa:
    € 16,90
      Confronta
  10. 2821 - Motor with 64 CPR Encoder for 37D mm Metal Gearmotors (No Gearbox)

    342821 2821 - Motor with 64 CPR Encoder for 37D mm Metal Gearmotors (No Gearbox)

    This is the motor and encoder portion of our 37D mm metal gearmotors with 64 CPR encoders. It does not include a gearbox, butfalse
    Tasse escluse:
    € 18,40
    IVA inclusa:
    € 22,45
      Confronta
  11. 3081 - Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (HPCB compatible)

    343081 3081 - Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (HPCB compatible)

    Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnefalse
    Tasse escluse:
    € 7,30
    IVA inclusa:
    € 8,91
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!