The FC22 is a medium compression force sensor that offers excellent performance at a reasonable cost. The 3122 offers normalized zero and span for interchangeability and is thermally compensated for changes in zero and span with respect to temperature.
The 3122 can be used in applications such as Robotics End-Effectors, Variable Force Control, Load and Compression Sensing, Contact Sensing, and Weighing.
The 3122 incorporates MEAS’ proprietary Microfused™ technology which employs micromachined silicon piezoresistive strain gages fused with high temperature glass to a high performance stainless steel substrate. Microfused™ technology eliminates age-sensitive organic epoxies used in traditional load cell designs providing excellent long term span and zero stability.
The FC22 measures direct force and is therefore not subject to lead-die fatigue failure common with competitive designs which use a pressure capsule embedded within a silicone gel-filled cavity. Operating at very low strains, Microfused™ technology provides an essentially unlimited cycle life expectancy, superior resolution, and high over-range capabilities.
- Range: 0 - 50 lbs
- Small Size, Low Noise
- Essentially Unlimited Cycle Life Expectancy
- Fast Response Time
FormulaThe formula for converting SensorValue into lbs is:
|Worst case sensitivity error||±3%|
|Worst case offset @ 0 Force||±2.86 lbs|
|Maximum Overload||125 lbs|
|Operating Temperature||-40 to +85°C|
Comes packaged with:
- Attached 60cm cable (2")
This sensor connects to any Analog Input on the:
- 1018 - PhidgetInterfaceKit 8/8/8
- 1019 - PhidgetInterfaceKit 8/8/8 w/6 Port Hub
- 1203 - PhidgetTextLCD
- 1070 - PhidgetSBC
The easiest way to connect the sensor is to use a 3002 - Sensor Cable 60cm or a 3004 - Sensor Cable 350cm ; cut the sensor cable to the desired length and solder the load cell wires to the sensor cable as follows:
|3122 - Load Cell||Sensor Cable|
Questions on 3122 - FC22 Compression Load Cell (0-50 lbs) - FC2231-0000-0050L
No questions asked yetFai una domanda (Registrati oppure Esegui il Login ).