Salta il contenuto

Lingua

SKU 193138

3138 - S Type Load Cell (0-100kg) - CZL301C

Esaurito
Prezzo originale €68,04 - Prezzo originale €68,04
Prezzo originale
€68,04
€68,04 - €68,04
Prezzo attuale €68,04

Tutti i prezzi sono IVA inclusa

Disponibilità:
Esaurito
Richiesta Sconto per Quantita' e Informazioni

 

Product Features

Product Description
 

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification. Fortunately, the 1046 PhidgetBridge will perform all the amplification and measurement of the electrical output.

This S-Type load cell can be operated in compression or tension.

Product Specifications

Precision see calibration certificate
Non-Linearity see calibration certificate
Repeatability see calibration certificate
Creep see calibration certificate
Temp. effect on zero see calibration certificate
Temp. effect on span see calibration certificate
Zero Balance see calibration certificate
Compensated Temp. Range -10°C~+40°C
Operating Temp. Range -20°C~+55°C
Safe Overload 120%F.S
Maximum Overload 150%F.S

Resources

The Data Sheet below has a comprehensive glossary that describes in practical terms the meaning and usefulness of the specifications.

Warning

warning Make sure to calibrate your load cell before using it. You can find information on how to calibrate the cell in the 3138 Datasheet. You should also look at the 1046 – PhidgetBridge Product Manual.

Connection
 

The 3138 connects to a bridge on the 1046 – PhidgetBridge 4-Input

 

FUNCTIONAL

The following table shows how to connect the Load Cell Wires to the bridge connectors.

Wire Color Red Green White Black/Yellow
Bridge Connector 5V + - GND

 

Wiring