323217 3217 - 47:1 Metal Gearmotor 25Dx52L mm HP 12V with 48 CPR Encoder

3217 - 47:1 Metal Gearmotor 25Dx52L mm HP 12V with 48 CPR Encoder

This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 46.85:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2248.86 counts per revolution of the gearbox’s output shaft.
Categorie
Prezzi IVA inclusa
€ 37,09 Prezzo
€ 30,40 + VAT

Qty
 

Dettagli

This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 46.85:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2248.86 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.

Key specs at 12 V: 210 RPM and 300 mA free-run, 165 oz-in (12 kg-cm) and 5.6 A stall.

 
These cylindrical brushed DC gearmotors are available in a wide range of gear ratios and with five different motors (two power levels of 6V motors and three power levels of 12V motors). The gearmotors all have the same 25 mm diameter case and 4 mm diameter gearbox output shaft, so it is generally easy to swap one version for another if your design requirements change (though the length of the gearbox tends to increase with the gear ratio). All versions are also available with an integrated 48 CPR quadrature encoder on the motor shaft. 

Note: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage. For these gearboxes, the recommended upper limit for instantaneous torque is 200 oz-in (15 kg-cm); we strongly advise keeping applied loads well under this limit. Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes, especially for the versions that use high-power (HP) motors; a general recommendation for brushed DC motor operation is 25% or less of the stall current.

Dimensions

Size: 25D x 64L mm
Weight: 101 g
Shaft diameter: 4 mm

General specifications

Gear ratio: 46.85:1
Free-run speed @ 6V: 105 rpm1
Stall current @ 6V: 2800 mA1
Stall torque @ 6V: 80 oz·in1
Free-run speed @ 12V: 210 rpm
Free-run current @ 12V: 300 mA
Stall current @ 12V: 5600 mA
Stall torque @ 12V: 165 oz·in
Lead length: 8 in2
Motor type: 5.6A stall @ 12V (HP 12V)
Encoders?: Y

Notes:

1 This motor will run at 6 V but is intended for operation at 12 V.
2 May vary by a few inches.


Specifiche

Part. No. : 3217
Diam. Asse mm : 4

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 3217 - 47:1 Metal Gearmotor 25Dx52L mm HP 12V with 48 CPR Encoder

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Motoriduttore 12Vdc 81RPM Encoder

    420114 Motoriduttore 12Vdc 81RPM Encoder

    Motoriduttore: Tensione 12 Vdc Coppia 5.1 Kg/cm 81 RPM Diametro Asse 6 mm Encoder 3 impulsi / giro
    Tasse escluse:
    € 16,85
    IVA inclusa:
    € 20,56
      Confronta
  2. Motoriduttore 12Vdc 66RPM Encoder

    420115 Motoriduttore 12Vdc 66RPM Encoder

    Motoriduttore: Tensione 12 Vdc Coppia 6.12 Kg/cm 66 RPM Diametro Asse 6 mm Encoder 3 impulsi / giro
    Tasse escluse:
    € 16,34
    IVA inclusa:
    € 19,93
      Confronta
  3. Motoriduttore 12Vdc 33RPM Encoder

    420116 Motoriduttore 12Vdc 33RPM Encoder

    Motoriduttore: Tensione 12 Vdc Coppia 10.2 Kg/cm 33 RPM Diametro Asse 6 mm Encoder 3 impulsi / giro
    Tasse escluse:
    € 17,54
    IVA inclusa:
    € 21,40
      Confronta
  4. 2826 - 100:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder

    342826 2826 - 100:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder

    This gearmotor is a powerful 12V brushed DC motor with a 102.083:1 metal gearbox and an integrated quadrature encoder that prfalse
    Tasse escluse:
    € 27,84
    IVA inclusa:
    € 33,96
      Confronta
  5. 2825 - 70:1 Metal Gearmotor 37Dx70L mm with 64 CPR Encoder

    342825 2825 - 70:1 Metal Gearmotor 37Dx70L mm with 64 CPR Encoder

    This gearmotor is a powerful 12V brushed DC motor with a 70:1 metal gearbox and an integrated quadrature encoder that providefalse
    Tasse escluse:
    € 32,59
    IVA inclusa:
    € 39,76
      Confronta
  6. 99:1 Metal Gearmotor 25Dx54L mm HP 6V with 48 CPR Encoder

    342276 99:1 Metal Gearmotor 25Dx54L mm HP 6V with 48 CPR Encoder

    This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 98.78:1 metal spur gearbox, and it has an integfalse
    Tasse escluse:
    € 30,40
    IVA inclusa:
    € 37,09
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!