Dettagli
This NEMA-17 motor has an integrated Planetary gearbox with a 504397/4913 :1 ratio. It comes with the rear shaft exposed, so you can mount an encoder or shaft coupler.
When connected to a 1067 - PhidgetStepper Bipolar HC, the 3328 has a maximum speed of 63 RPM. At the output of the gearbox, the step angle is approximately 0.035°. When using the step angle in calculations, you should derive the exact step angle by dividing 1.8° by the gearbox reduction ratio.
At 1.7 Amps, this stepper motor can produce a maximum torque of 180 kg-cm. However, the gearbox is only rated for 48 kg-cm of continuous torque. Loading this gearbox stepper beyond the torque rating of the gearbox will shorten its useful life.
The 3328 stepper motor connects to a bipolar motor controller such as the 1067 - PhidgetStepper Bipolar HC.
The following table shows how to connect the motor wires to the board connectors to produce a clockwise rotation in the stepper motor when increasing position. To wire for counter-clockwise rotation when increasing position, reverse the red and blue wires.
Wire Color | Black | Green | Red | Blue |
Board Connector | A | B | C | D |
Note: Make sure to unplug the power cord from the motor controller before switching wires around.
The rear shaft of this motor can be equipped with the HKT22 Optical Encoder for applications where you need to keep track of the exact position, velocity, or acceleration of the motor.
Motor Properties
Motor Type | Bipolar Stepper |
Manufacturer Part Number | 42STH38-1684B / 36JXS60K51 |
Step Angle | 0.035° |
Step Accuracy | ± 5 % |
Holding Torque | 48 kg·cm |
Rated Torque | 48 kg·cm |
Maximum Speed (w/1067 Motor Controller) | 63 RPM |
Acceleration at Max Speed (w/1067 Motor Controller) |
1.35E+06 1/16 steps/sec² |
Electrical Properties
Recommended Voltage | 12 V DC |
Rated Current | 1.7 A |
Coil Resistance | 1.7 Ω |
Physical Properties
Shaft Diameter | 8 mm |
Rear Shaft Diameter | 3.9 mm |
Mounting Plate Size | NEMA - 17 |
Weight | 564 g |
Number of Leads | 4 |
Wire Length | 300 mm |
Gearbox Properties
Gearbox Type | Planetary |
Gear Ratio | 50 4397⁄4913 : 1 |
Backlash Error | 1 1⁄2° |
Maximum Strength of Gears | 48 kg·cm |
Shaft Maximum Axial Load | 49.1 N |
Shaft Maximum Radial Load | 98.1 N |
Connecting the motor directly to a power supply will destroy the motor and void the warranty. If you want to check your motor make sure it is connected to a constant current / chopper drive controller. |
Specifiche
Part. No. : | 3328 |
NEMA : | 17 |
WINDING : | Bipolar |
Diam. Asse mm : | 8 |
Questions on 3328 - 42STH38 NEMA-17 Bipolar Stepper with 51:1 Gearbox
No questions asked yet
Fai una domanda (Registrati oppure Esegui il Login ).Prodotti correlati
-
193531 3531 - Optical Rotary Encoder HKT22
This low-cost encoder is designed to fit on the rear shaft of our stepper motors. Measure the rotation of your motor even whefalse -
193338 3338 - Stepper Mounting Bracket (NEMA 17)
Fix a NEMA-17 sized motor or 36mm gearbox to a flat surface with this steel mounting bracket. -
193324 3324 - 42STH38 NEMA-17 Bipolar Gearless Stepper
This affordable bipolar stepper with a rear shaft has a 1.8° step angle and 3.3 kg·cm of torque at low speeds. -
193326 3326_0 - 42STH38 NEMA-17 Bipolar Stepper with 14:1 Gearbox
This bipolar stepper with a rear shaft and a planetary gearbox has a 0.13° step angle and 30 kg·cm of torque at low speeds. -
342267 2267 - Stepper Motor: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase
Motore passo passo bipolare, nema 17