807833 713 - TB6612FNG Dual Motor Driver Carrier

713 - TB6612FNG Dual Motor Driver Carrier

This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 – 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors.
Categorie
Prezzi IVA inclusa
€ 5,44 Prezzo
€ 4,46 + VAT

Qty
 

Dettagli

This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. A recommended motor voltage of 4.5 – 13.5 V and peak current output of 3 A per channel (1 A continuous) make this a great motor driver for low-power motors.

The TB6612FNG (308k pdf) is a great dual motor driver that is perfect for interfacing two small DC motors such as our micro metal gearmotors to a microcontroller, and it can also be used to control a single bipolar stepper motor. The MOSFET-based H-bridges are much more efficient than the BJT-based H-bridges used in older drivers such as the L298N and Sanyo’s LB1836M, which allows more current to be delivered to the motors and less to be drawn from the logic supply (the LB1836 still has the TB6612 beat for really low-voltage applications). Our little breakout board gives you direct access to all of the features of the TB6612FNG and adds power supply capacitors and reverse battery protection on the motor supply (note: there is no reverse protection on the Vcc connection).

In a typical application, power connections are made on one side of the board and control connections are made on the other. All of the control inputs are internally pulled low. Each of the two motor channels has two direction control pins and a speed control pin that accepts a PWM input with a frequency of up to 100 kHz. The STBY pin must be driven high to take the driver out of standby mode.

 

Features and specifications

  • Dual-H-bridge motor driver: can drive two DC motors or one bipolar stepper motor
  • Recommended motor voltage (VMOT): 4.5 V to 13.5 V (can operate down to 2.5 V with derated performance)
  • Logic voltage (VCC): 2.7 V to 5.5 V
  • Output current maximum: 3 A per channel
  • Output current continuous: 1 A per channel (can be paralleled to deliver 2 A continuous)
  • Maximum PWM frequency: 100 kHz
  • Built-in thermal shutdown circuit
  • Filtering capacitors on both supply lines
  • Reverse-power protection on the motor supply

Real-world power dissipation considerations

The TB6612 motor driver used on the carrier board has a peak current rating of 3 A per channel. The peak ratings are for quick transients (e.g. when a motor is first turned on), and the continuous rating of 1 A is dependent on various conditions, such as the ambient temperature. The actual current you can deliver will depend on how well you can keep the motor driver cool. The carrier’s printed circuit board is designed to draw heat out of the motor driver chip, but performance can be improved by adding a heat sink.

This product can get hot enough to burn you long before the chip overheats. Take care when handling this product and other components connected to it.

Included hardware

A 1×16-pin breakaway 0.1″ male header strip is included with the TB6612FNG motor driver carrier. This strip can optionally be soldered to the carrier board so that it can be used with perfboards, solderless breadboards, or 0.1″ female connectors. (The headers might ship as two 1×8 pieces or as a single 1×16 piece that can be broken in half.)

July 9, 2013 Update: We have changed this carrier board slightly by replacing the tall electrolytic capacitor with a much smaller ceramic capacitor. The two versions are functionally identical. 

Dimensions

Size:

0.60" x 0.80"

General specifications

Motor driver:

TB6612FNG

Motor channels:

2

 

 

Minimum operating voltage:

4.5 V

Maximum operating voltage:

13.5 V

Continuous output current per channel:

1 A

Peak output current per channel:

3 A

Continuous paralleled output current:

2 A

Maximum PWM frequency:

100 kHz

Minimum logic voltage:

2.7 V

Maximum logic voltage:

5.5 V

Reverse voltage protection?:

Y

 

 

File downloads

TB6612FNG-dual motor driver carrier schematic diagram (156k pdf)

Printable schematic diagram for the TB6612FNG-dual motor driver carrier.

Toshiba TB6612FNG motor driver datasheet (308k pdf)

 

Recommended links

“How to use the TB6612FNG motor driver with the Arduino for noobs”

This MeanPC.com guide explains how to control the TB6612FNG Dual Motor Driver Carrier with an Arduino.

Specifiche

Part. No. : 713

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on 713 - TB6612FNG Dual Motor Driver Carrier

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Motor Driver 1A Dual TB6612FNG

    709457 Motor Driver 1A Dual TB6612FNG

    Modulo per controllare due motori DC fino a 1.2A.
    Tasse escluse:
    € 6,41
    IVA inclusa:
    € 7,82
      Confronta
  2. MiniMoto - DRV8830 Breakout

    711890 MiniMoto - DRV8830 Breakout

    Motor Controller basato sul Chip DRV8830, controlla un Motore a spazzole, con tensione da 2,7V a 6,8V e 1A di potenza max. Sifalse
    Tasse escluse:
    € 7,70
    IVA inclusa:
    € 9,39
      Confronta
  3. 2130 - DRV8833 Dual Motor Driver Carrier

    807831 2130 - DRV8833 Dual Motor Driver Carrier

    This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair ofalse
    Tasse escluse:
    € 4,46
    IVA inclusa:
    € 5,44
      Confronta
  4. 2135 - DRV8835 Dual Motor Driver Carrier

    807832 2135 - DRV8835 Dual Motor Driver Carrier

    This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pairfalse
    Tasse escluse:
    € 4,07
    IVA inclusa:
    € 4,97
      Confronta
  5. 2137 - A4990 Dual Motor Driver Carrier

    807834 2137 - A4990 Dual Motor Driver Carrier

    This compact breakout board makes it easy to use Allegro’s A4990 dual motor driver, which can control two bidirectional DC mofalse
    Tasse escluse:
    € 4,85
    IVA inclusa:
    € 5,92
      Confronta
  6. 2990 - DRV8838 Single Brushed DC Motor Driver Carrier

    342990 2990 - DRV8838 Single Brushed DC Motor Driver Carrier

    This tiny breakout board for TI’s DRV8838 motor driver can deliver a continuous 1.7 A (1.8 A peak) to a single brushed DC motor.
    Tasse escluse:
    € 3,15
    IVA inclusa:
    € 3,84
      Confronta
  7. 2753 - Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi B+

    342753 2753 - Pololu DRV8835 Dual Motor Driver Kit for Raspberry Pi B+

    This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solutfalse
    Tasse escluse:
    € 6,10
    IVA inclusa:
    € 7,44
      Confronta
  8. Automotive Gauge Stepper Motor - x27.168

    808337 Automotive Gauge Stepper Motor - x27.168

    This stepper motor is a little different than the large NEMA-17 types you may be used to. These are often used in gauges for false
    Tasse escluse:
    € 9,21
    IVA inclusa:
    € 11,24
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!