807929 Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

The MPR121 has support for only I2C, which can be implemented with nearly any microcontroller. You can select one of 4 addresses with the ADDR pin, for a total of 48 capacitive touch pads on one I2C 2-wire bus.
Categorie
Prezzi IVA inclusa
€ 8,98 Prezzo
€ 7,36 + VAT

Qty
 

Dettagli

Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touch pads.

The MPR121 has support for only I2C, which can be implemented with nearly any microcontroller. You can select one of 4 addresses with the ADDR pin, for a total of 48 capacitive touch pads on one I2C 2-wire bus. Using this chip is a lot easier than doing the capacitive sensing with analog inputs: it handles all the filtering for you and can be configured for more/less sensitivity.

This sensor comes as a tiny hard-to-solder chip so we put it onto a breakout board for you. Since it's a 3V-only chip, we added a 3V regulator and I2C level shifting so its safe to use with any 3V or 5V microcontroller/processor like Arduino. We even added an LED onto the IRQ line so it will blink when touches are detected, making debugging by sight a bit easier on you. Comes with a fully assembled board, and a stick of 0.1" header so you can plug it into a breadboard. For contacts, we suggest using copper foil or pyralux, then solder a wire that connects from the foil pad to the breakout.

Getting started is a breeze with our Arduino library and tutorial. You'll be up and running in a few minutes, and if you are using another microcontroller, its easy to port our code.

Of course, we wouldn't leave you with a datasheet and a "good luck!" - we wrote a detailed tutorial showing how to wire up the sensor, use it with an Arduino and example code that gets the sensor logging data and detecting your touch!

MPR121 Datasheet

  • Dimensions: 33mm x 19mm x 2mm / 1.3" x .8" x .1"
  • Weight: 2.2g
  • Uses I2C 7-bit address 0x5A (can be set to 0x5B, 0x5C or 0x5C)

Specifiche

Part. No. : 1982

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit 12-Key Capacitive Touch Sensor Breakout - MPR121

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. MPR121 Capacitive Touch Sensor Breakout Board

    709695 MPR121 Capacitive Touch Sensor Breakout Board

    Modulo con sensore MPR121QR2 capacitive touch sensor della Freescale. Il sensore MPR121 e' un sensore capacitivo con interfacfalse
    Tasse escluse:
    € 6,41
    IVA inclusa:
    € 7,82
      Confronta
  2. 1129 - Touch sensor

    191129 1129 - Touch sensor

    Sensore capacitivo in grado di rilevare il tocco attraverso plastica, vetro o carta con spessore massimo di 1.2cm. Questo senfalse
    Tasse escluse:
    € 12,03
    IVA inclusa:
    € 14,68
      Confronta
  3. Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

    511375 Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

    This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor.
    Tasse escluse:
    € 5,55
    IVA inclusa:
    € 6,77
      Confronta
  4. Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010

    511374 Standalone Momentary Capacitive Touch Sensor Breakout - AT42QT1010

    When a capacitive load is detected (e.g. a person touches the sensor-pad area) the red LED lights up and the output pin goes high.
    Tasse escluse:
    € 5,55
    IVA inclusa:
    € 6,77
      Confronta
  5. Grove - Touch Sensor

    115227 Grove - Touch Sensor

    Modulo con Touch Sensor
    Tasse escluse:
    € 4,05
    IVA inclusa:
    € 4,94
      Confronta
  6. CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

    807653 CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPI

    Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakofalse
    Tasse escluse:
    € 6,35
    IVA inclusa:
    € 7,75
      Confronta
  7. Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121

    808302 Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121

    This touch-able add on shield for Arduinos will inspire your next interactive project with 12 capacitive touch sensors. Capacfalse
    Tasse escluse:
    € 11,56
    IVA inclusa:
    € 14,10
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!