807737 Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi

Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi

Scheda di connessione per Raspberry Pi. Rende semplice l'utilizzo di una breadboard per gestire le porte del Raspberry. Versione assemblata.
Categorie
Prezzi IVA inclusa
€ 7,89 Prezzo
€ 6,47 + VAT

Qty
 

Dettagli

Now that you've finally got your hands on a Raspberry Pi® , you're probably itching to make some fun embedded computer projects with it. What you need is an assembled add on prototyping Pi T-Cobbler from Adafruit, which can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header onto a solderless breadboard. This mini kit will make "cobbling together" prototypes with the Pi super easy. Designed for Raspberry Pi Model B Revision 1 or Revision 2. 

The assembled Pi T-Cobbler mini kit comes with a 26 pin ribbon cable, and an already soldered T-Cobbler as shown. No soldering required! This mini kit comes fully assembled! 

The PCB and header come soldered together so you can plug the cable between the Pi computer and the T-Cobbler breakout. The T-Cobbler can plug into any solderless breadboard (or even a prototyping board like the PermaProto). The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it. 

The Adafruit Pi T-Cobbler is compatible with both versions 1 and 2 of the Raspberry Pi Computer - for version 2 computers, note that the GPIO #21 has been replaced with GPIO #27 and that the I2C pins are now I2C port #1 instead of #0. All other pins are the same. 

Please note, this product only contains a 26 pin ribbon cable, a custom PCB with ribbon cable socket and header pins soldered to it. The Raspberry Pi, breadboard, breadboarding wires, cables, components, case, power supply, etc is not included! We do stock many of those items in the shop, so check those out as well! 

What is the Raspberry Pi® ? A low-cost ARM GNU/Linux box.

 The Raspberry Pi® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The design is based on a Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 megabytes of RAM. The design does not include a built-in hard disk or solid-state drive, instead relying on an SD card for booting and long-term storage. The Foundation plans to support Fedora Linux as the initial system software package/distribution, with support for Debian and Arch Linux as well - Wikipedia.


Raspberry Pi® is a trademark of the Raspberry Pi Foundation.

Ribbon Cable Dimensions:

  • 173mm x 33mm / 6.8" x 1.3"
  • Weight: 14.4g



Pi T-Cobbler Dimensions:

  • 55mm x 15mm x 11mm / 2.2" x 0.6" x 0.4"
  • Width of T: 40mm / 1.6"
  • Weight: 8.5g

Specifiche

Part. No. : 1754

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit Pi Cobbler Breakout Kit for Raspberry Pi

    501914 Adafruit Pi Cobbler Breakout Kit for Raspberry Pi

    Estensione per Raspberry Pi. Utile per prototipare su breadboard o protoboards....
    Tasse escluse:
    € 6,01
    IVA inclusa:
    € 7,33
      Confronta
  2. Raspberry Pi - Model B - 512MB

    802465 Raspberry Pi - Model B - 512MB

    Minicomputer Raspberry PI, versione B con 512MB di RAM. Basta inserire una SD con il sistema operativo, collegare monitor, tafalse
    Tasse escluse:
    € 33,90
    IVA inclusa:
    € 41,36
      Confronta
  3. Adafruit Pi T-Cobbler Breakout Kit for Raspberry Pi

    501105 Adafruit Pi T-Cobbler Breakout Kit for Raspberry Pi

    Scheda di connessione per Raspberry Pi. Rende semplice l'utilizzo di una breadboard per gestire le porte del Raspberry. Richifalse
    Tasse escluse:
    € 6,47
    IVA inclusa:
    € 7,89
      Confronta
  4. SparkFun Pi Wedge (Preassembled)

    713717 SparkFun Pi Wedge (Preassembled)

    This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pifalse
    Tasse escluse:
    € 9,63
    IVA inclusa:
    € 11,75
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!