808655 Adafruit ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

Adafruit ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups
Categorie
Prezzi IVA inclusa
€ 28,15 Prezzo
€ 23,07 + VAT

Qty
 

Dettagli

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). We like these so much, they've completely replaced the CC3000 module on all our projects.

The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino Zero, and seems to work OK on Uno but may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds.

This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!

Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC. There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data.

Note: This version does not come with an onboard antenna, you will need a uFL connector antenna such as 2.4GHz Mini Flexible WiFi Antenna - not included! We have a version with on-board antenna as well

Comes with a stick of header you can solder on, to plug into a breadboard and a set of tutorials & code so you can follow along!

  • 33mm x 28mm x 4mm / 1.3" x 1.1" x 0.16"
  • Weight: 4.4g

Specifiche

Part. No. : 3060

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit ATWINC1500 WiFi Breakout with uFL Connector - fw 19.4.4

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit Feather HUZZAH with ESP8266 WiFi

    808585 Adafruit Feather HUZZAH with ESP8266 WiFi

    This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built in USB anfalse
    Tasse escluse:
    € 16,86
    IVA inclusa:
    € 20,57
      Confronta
  2. Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500

    808602 Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500

    This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFfalse
    Tasse escluse:
    € 32,32
    IVA inclusa:
    € 39,43
      Confronta
  3. Adafruit ATWINC1500 WiFi Breakout

    808603 Adafruit ATWINC1500 WiFi Breakout

    Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel.
    Tasse escluse:
    € 23,07
    IVA inclusa:
    € 28,15
      Confronta
  4. Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 - fw 19.4.4

    808653 Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500 - fw 19.4.4

    This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFfalse
    Tasse escluse:
    € 32,32
    IVA inclusa:
    € 39,43
      Confronta
  5. Adafruit Feather M0 RFM69 Packet Radio - 433MHz

    808729 Adafruit Feather M0 RFM69 Packet Radio - 433MHz

    This is the Adafruit Feather M0 RFM69 Packet Radio (433 MHz) - our take on an microcontroller with a RFM69 HCW packet radio tfalse
    Tasse escluse:
    € 23,07
    IVA inclusa:
    € 28,15
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!