501914 Adafruit Pi Cobbler Breakout Kit for Raspberry Pi

Adafruit Pi Cobbler Breakout Kit for Raspberry Pi

Estensione per Raspberry Pi. Utile per prototipare su breadboard o protoboards....
Categorie
Prezzi IVA inclusa
€ 7,33 Prezzo
€ 6,01 + VAT

Qty
 

Dettagli

Now that you've finally got your hands on a Raspberry Pi® , you're probably itching to make some fun embedded computer projects with it. What you need is an add on prototyping Pi Cobbler from Adafruit, which can break out all those tasty power, GPIO, I2C and SPI pins from the 26 pin header onto a solderless breadboard. This mini kit will make "cobbling together" prototypes with the Pi super easy. 

The Pi Cobbler mini kit comes with a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins.A little soldering is required to put it together but its really easy, even a beginner can do it in 15 minutes so please click to read the tutorial Once soldered together, the cable plugs between the Pi computer and the Cobbler breakout. The Cobbler can plug into any solderless breadboard . The Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk. We think this will make it more fun to expand the Pi and build custom circuitry with it. 

Please note, this kit only contains a 26 pin ribbon cable, a custom PCB, ribbon cable socket and header pins. A Raspberry Pi, breadboard, breadboarding wires, cables, components, case, power supply, etc is not included! We do stock many of those items in the shop, so check those out as well! 

What is the Raspberry Pi® ? A low-cost ARM GNU/Linux box.

The Raspberry Pi® is a single-board computer developed in the UK by the Raspberry Pi Foundation with the intention of stimulating the teaching of basic computer science in schools. The design is based on a Broadcom BCM2835 system on a chip (SoC), which includes an ARM1176JZF-S 700 MHz processor, VideoCore IV GPU, and 256 megabytes of RAM. The design does not include a built-in hard disk or solid-state drive, instead relying on an SD card for booting and long-term storage. The Foundation plans to support Fedora Linux as the initial system software package/distribution, with support for Debian and Arch Linux as well - Wikipedia.



Raspberry Pi® is a trademark of the Raspberry Pi Foundation.

Specifiche

Part. No. : 914

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit Pi Cobbler Breakout Kit for Raspberry Pi

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Adafruit Prototyping Pi Plate Kit for Raspberry Pi

    501801 Adafruit Prototyping Pi Plate Kit for Raspberry Pi

    Il Pi Plate di Adafruit si inserisce sul PCB del Raspberry Pi e aggiunge la possibilita' di prototipazione. Puo' essere rimosfalse
    Tasse escluse:
    € 14,80
    IVA inclusa:
    € 18,06
      Confronta
  2. GPIO Ribbon Cable for Raspberry Pi

    501862 GPIO Ribbon Cable for Raspberry Pi

    Cavo Flat per il connettore del Raspberry Pi. Consente di utilizzare comodamente i GPIO di cui e' provvisto.
    Tasse escluse:
    € 3,08
    IVA inclusa:
    € 3,76
      Confronta
  3. Adafruit RGB Negative 16x2 LCD+Keypad Kit for Raspberry Pi

    502110 Adafruit RGB Negative 16x2 LCD+Keypad Kit for Raspberry Pi

    Display RGB in kit, sono inclusi i componenti ed il display, da montare. Compatibile con Raspberry PI ( Rev. 1 e Rev. 2 )
    Tasse escluse:
    € 23,11
    IVA inclusa:
    € 28,19
      Confronta
  4. Raspberry Pi - Model B - 512MB

    802465 Raspberry Pi - Model B - 512MB

    Minicomputer Raspberry PI, versione B con 512MB di RAM. Basta inserire una SD con il sistema operativo, collegare monitor, tafalse
    Tasse escluse:
    € 33,90
    IVA inclusa:
    € 41,36
      Confronta
  5. Adafruit Perma-Proto Raspberry Pi Breadboard PCB Kit

    501135 Adafruit Perma-Proto Raspberry Pi Breadboard PCB Kit

    Scheda di prototipazione tipo breadboard, per Raspberry PI
    Tasse escluse:
    € 7,40
    IVA inclusa:
    € 9,03
      Confronta
  6. Adafruit Pi T-Cobbler Breakout Kit for Raspberry Pi

    501105 Adafruit Pi T-Cobbler Breakout Kit for Raspberry Pi

    Scheda di connessione per Raspberry Pi. Rende semplice l'utilizzo di una breadboard per gestire le porte del Raspberry. Richifalse
    Tasse escluse:
    € 6,47
    IVA inclusa:
    € 7,89
      Confronta
  7. Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi

    807737 Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi

    Scheda di connessione per Raspberry Pi. Rende semplice l'utilizzo di una breadboard per gestire le porte del Raspberry. Versifalse
    Tasse escluse:
    € 6,47
    IVA inclusa:
    € 7,89
      Confronta
  8. Adafruit Perma-Proto Quarter-sized Breadboard PCB - Single

    808243 Adafruit Perma-Proto Quarter-sized Breadboard PCB - Single

    This proto-board is the PCB you always wish you had, but never realized it! We took the basic layout of a quarter-sized breadfalse
    Tasse escluse:
    € 3,08
    IVA inclusa:
    € 3,76
      Confronta
  9. SparkFun Pi Wedge (Preassembled)

    713717 SparkFun Pi Wedge (Preassembled)

    This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pifalse
    Tasse escluse:
    € 9,63
    IVA inclusa:
    € 11,75
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!