808306 Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 - Mini Kit

Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 - Mini Kit

It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2
Categorie
Prezzi IVA inclusa
€ 50,72 Prezzo
€ 41,57 + VAT

Qty
 

Dettagli

It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS on it, so you can add precision time and location to your Raspberry Pi Model A+, B+, or Pi 2

Here's the low-down on the GPS module:

  • -165 dBm sensitivity, 10 Hz updates, 66 channels
  • Only 20mA current draw
  • Built in Real Time Clock (RTC) - slot in a CR1220 backup battery for 7-years or more of timekeeping even if the Raspberry Pi is off!
  • PPS output on fix, by default connected to pin #4
  • Internal patch antenna which works quite well when used outdoors + u.FL connector for external active antenna for when used indoors or in locations without a clear sky view
  • Fix status LED blinks to let you know when the GPS has determined the current coordinates

We spun up a HAT based on our Ultimate GPS, added a coin-cell holder for RTC usage, break-outs for all the Raspberry Pi's extra pins, and plenty of prototyping area for adding LEDs, sensors, and more.

Please note, this HAT takes over the Raspberry Pi's hardware UART to send/receive data to and from the GPS module. So, if you need to use the RX/TX pins with a console cable, you cannot also use this HAT. Instead, you'll have to use a composite or HDMI monitor and keyboard to log in, or use ssh to connect over the network to your Pi. Read up on our tutorial for more information on how to use this fine HAT

Comes as a fully assembled GPS + PCB and an additional 2x20 GPIO header. Some light soldering is required to attach the 2x20 GPIO header to the HAT but it's fast and easy for anyone with a soldering iron and solder. You can also swap the plain female header we have with a 'stacky' type that lets you plug in a hat or GPIO cable on top or a slim ultra-low-profile header. 

To make air-shipping eaiser, this HAT does not come with a 12mm coin battery! A CR1220 will let you use the real-time-clock capability of the GPS HAT.

Specifiche

Part. No. : 2324

Tags prodotto

Usa gli spazi per tag separati. Usa virgolette singole (') per frasi.

Questions on Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2 - Mini Kit

No questions asked yet

Fai una domanda (Registrati oppure Esegui il Login ).
Fai una domanda (Registrati oppure Esegui il Login ).
  1. Raspberry Pi Model B+ 512MB RAM

    807883 Raspberry Pi Model B+ 512MB RAM

    Minicomputer Raspberry PI, versione B con 512MB di RAM. Basta inserire una SD con il sistema operativo, collegare monitor, tafalse
    Tasse escluse:
    € 30,30
    IVA inclusa:
    € 36,97
      Confronta
  2. Raspberry Pi Model A+ 256MB RAM

    808190 Raspberry Pi Model A+ 256MB RAM

    The Raspberry Pi Model A+ is the perfect board for the minimalist Pi fan. This low-cost Pi uses the same processor as the modfalse
    Tasse escluse:
    € 26,50
    IVA inclusa:
    € 32,33
      Confronta
  3. Raspberry Pi 2 Model B - 1GB RAM

    808238 Raspberry Pi 2 Model B - 1GB RAM

    The new Raspberry Pi 2 - Model B is jam packed with features! With a new quad core processor and twice the memory with a massfalse
    Tasse escluse:
    € 41,20
    IVA inclusa:
    € 50,26
      Confronta

Se hai trovato questo prodotto ad un prezzo migliore, inviaci una segnalazione, faremo tutto il possibile per accontentarti.

Price Match



* Campi richiesti

Il nostro Reparto Vendite rispondera' entro 24 ore via e-mail.

Grazie per la tua fiducia in Robot Italy!